Quebecker ballin' on a budget
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2014
Location: Quebec
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Quebecker ballin' on a budget
I've been lurking here for a while and i want to thank everyone for the info on here. Now its time to show you the big gurl....
Got it for 1200$ cdn. Pretty cheap drove perfect but had minor damage on both right corner.
I changed both broken corner lights and painted the wheels
Lowered it on megan EZ
Maybe too much
Lol with my stupid neon shoes
Time for some wheels since i wanted to keep cost down i went with XXR 521 platinium. 18x11 +20 in the back and 18x9.5 +35 in the front. Front needed 15mil spacer to fit the caliper.
Tires i chose Achillies ATR sport 265/35 and 235/40. I like them
She needed a bit of a roll in the rear fenders but thats it
As of now this is how she sits.
Got it for 1200$ cdn. Pretty cheap drove perfect but had minor damage on both right corner.
I changed both broken corner lights and painted the wheels
Lowered it on megan EZ
Maybe too much
Lol with my stupid neon shoes
Time for some wheels since i wanted to keep cost down i went with XXR 521 platinium. 18x11 +20 in the back and 18x9.5 +35 in the front. Front needed 15mil spacer to fit the caliper.
Tires i chose Achillies ATR sport 265/35 and 235/40. I like them
She needed a bit of a roll in the rear fenders but thats it
As of now this is how she sits.
#5
welcome and great intro! i've imagined the high beams are used for DRLs since they are mandatory in canada, but never seen them on until now.
be sure to take care of the maintenance such as the timing belt done every 90k miles. there are thread to show how to do it yourself! there is never such thing as too low haha!
be sure to take care of the maintenance such as the timing belt done every 90k miles. there are thread to show how to do it yourself! there is never such thing as too low haha!
#6
Driver School Candidate
Thread Starter
Join Date: Aug 2014
Location: Quebec
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I did the timing belt when the damper pulley broke.... it took the crank sensir with it and since i was there i did the belt. Everything went smoothly thanks to this forum
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post