Rob Daddy's build thread
#62
Instructor
iTrader: (16)
Didn't mean to hijack Rob. SSR GT3 barrels are welded so I moved them into some Asanti barrels. Moved the 3.5" rear Asanti lips to the front and put some 4.5" lips in the back. New specs are 19x9.5 (+30) and 19x11 (+24). I'll start my own thread with better pics, but I'm still assembling a front wheel.
#64
Lead Lap
Thread Starter
Ok i finally picked her up! Sooo happy with the results.
Messed with the suspension some & was only able to install the back wheels. Waiting for some spacers for the front.
Here are some pics;
The drive home
After lowering rear suspension
After installing front RCAs (thanks PHML)
Messed with the suspension some & was only able to install the back wheels. Waiting for some spacers for the front.
Here are some pics;
The drive home
After lowering rear suspension
After installing front RCAs (thanks PHML)
#67
Lead Lap
Thread Starter
Thanks guys. got a long way to go still before I think its right.
Got a new issue. Found out that my right front speed sensor was damaged then taped back together, so now i have to buy one of those.
Still gotta get a right front window then I can have the car retinted.
Then an alignment & clear bra the entire front.
New 01+ taillights to get rid of the pink eye look
L Tuned grille (c'mon Mike Mr.Vossen let that piece go!)
Just taking things slow to make sure everything is going together smoothly.
Got a new issue. Found out that my right front speed sensor was damaged then taped back together, so now i have to buy one of those.
Still gotta get a right front window then I can have the car retinted.
Then an alignment & clear bra the entire front.
New 01+ taillights to get rid of the pink eye look
L Tuned grille (c'mon Mike Mr.Vossen let that piece go!)
Just taking things slow to make sure everything is going together smoothly.