Soarer build
#1
Rookie
Thread Starter
Join Date: Mar 2012
Location: GA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Soarer build
ok this is gonna be a long one but here we go .....
My first SC i bought off a member here
Uploaded with ImageShack.us
Uploaded with ImageShack.us
2jzgte (JDM)
Turbonetics T-66bb capable of 850rwhp
HKS filter
Tial 40mm wastegate
USDM 550cc with a resistor pack
HKS ssqv BOV
Jun lightened flywheel
Rps Max pressure Plate-6 puck clutch
R-154 5 Speed from a soarer
front section of an MK3 driveshaft
Clutch type LSD w/4.11 gearing
Hybrid brand FMIC with custom hotside
Dual spal fans
devils own meth injection
walbro 255 fuel pump
Electronics:
JVC double din
HKS Boost cut defencer
Greddy Speed cut defender
Apexi S-afc
Greddy dual exhaust
AEM wideband+gauge
Greddy profecII boost controller
optima bat
Suspension/brakes:
Espelir ASD/Tokico Blues
Supra TT front brakes
SupraTT rear brakes
Supra TT front and rear sway bars
Work Equips
19x10et21 245/35
19x11.5et29 285/30
Work VS-xx
19 305 rear
19 245 front
Interior: Tan
Supra TT seats
Exterior:
Autoreal realspeed kit (the only one in the states as far as I know)
5k Hid kit lo-beams
Jdm sidemarkers
Tinted windows
and my current side project
RWD converted 2jzgte powered 01 celica NOT A TUBE STEEL FRAME CAR IT HAS BEN BUILT ON STOCK UNIBODY AND HAS ALL POWER OPTIONS INCLUDING AC
HERE IS THE SOARER
LEGET US TITLED soarer
this in my current build while i work on my celica here are the parts on the soarer now
Motor
1jzgte
Built bottem end
HKS gt3037R
HKS manifold
HKS waistgate
HKS SSQV
HKS down pipe
272 Jun cames
walbro 255 x2
Tomei boost gauge
low boost 1bar
High boost 1.8bar
APEXi SAFC neo
4" Apexi exhaust
Trans
Dog box R154
TRD short throw
Tomei LSD
twin disc clutch
wheels
work VSKF
FRONT19x9 +25 245/35
REAR 19x10 +26 275/35
Suspension
TEIN >>> i have never seen this type tein coilovers...
My first SC i bought off a member here
Uploaded with ImageShack.us
Uploaded with ImageShack.us
2jzgte (JDM)
Turbonetics T-66bb capable of 850rwhp
HKS filter
Tial 40mm wastegate
USDM 550cc with a resistor pack
HKS ssqv BOV
Jun lightened flywheel
Rps Max pressure Plate-6 puck clutch
R-154 5 Speed from a soarer
front section of an MK3 driveshaft
Clutch type LSD w/4.11 gearing
Hybrid brand FMIC with custom hotside
Dual spal fans
devils own meth injection
walbro 255 fuel pump
Electronics:
JVC double din
HKS Boost cut defencer
Greddy Speed cut defender
Apexi S-afc
Greddy dual exhaust
AEM wideband+gauge
Greddy profecII boost controller
optima bat
Suspension/brakes:
Espelir ASD/Tokico Blues
Supra TT front brakes
SupraTT rear brakes
Supra TT front and rear sway bars
Work Equips
19x10et21 245/35
19x11.5et29 285/30
Work VS-xx
19 305 rear
19 245 front
Interior: Tan
Supra TT seats
Exterior:
Autoreal realspeed kit (the only one in the states as far as I know)
5k Hid kit lo-beams
Jdm sidemarkers
Tinted windows
and my current side project
RWD converted 2jzgte powered 01 celica NOT A TUBE STEEL FRAME CAR IT HAS BEN BUILT ON STOCK UNIBODY AND HAS ALL POWER OPTIONS INCLUDING AC
HERE IS THE SOARER
LEGET US TITLED soarer
this in my current build while i work on my celica here are the parts on the soarer now
Motor
1jzgte
Built bottem end
HKS gt3037R
HKS manifold
HKS waistgate
HKS SSQV
HKS down pipe
272 Jun cames
walbro 255 x2
Tomei boost gauge
low boost 1bar
High boost 1.8bar
APEXi SAFC neo
4" Apexi exhaust
Trans
Dog box R154
TRD short throw
Tomei LSD
twin disc clutch
wheels
work VSKF
FRONT19x9 +25 245/35
REAR 19x10 +26 275/35
Suspension
TEIN >>> i have never seen this type tein coilovers...
Last edited by 2jzcelica; 01-02-13 at 09:36 PM. Reason: removed sale
#6
Rookie
Thread Starter
Join Date: Mar 2012
Location: GA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys this is where i will keep my build up to date and i am gutting it for the black interior, brides and new radio as the soarer is a mother *****ER to hook a radio up in so a whole new harness is going in for the radio alone
Trending Topics
#11
Rookie
Thread Starter
Join Date: Mar 2012
Location: GA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Ok started the gutting last night
pulled the rear seat out and found mold .... great i have to fight swein flew bird flew sars and every thing else they have over there
so busted out the brush and cleaner and made a dent
then i pulled the passenger seat as my 2 bride seats are on the way
today we plan to pull the carpet and start the new radio installl i will have pics up soon
pulled the rear seat out and found mold .... great i have to fight swein flew bird flew sars and every thing else they have over there
so busted out the brush and cleaner and made a dent
then i pulled the passenger seat as my 2 bride seats are on the way
today we plan to pull the carpet and start the new radio installl i will have pics up soon
#12
Rookie
Thread Starter
Join Date: Mar 2012
Location: GA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
#15
Rookie
Thread Starter
Join Date: Mar 2012
Location: GA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts