FL WTB 99 GS400 Engine w/ harness and ecu
#1
Pole Position
Thread Starter
WTB 99 GS400 Engine w/ harness and ecu
Got a nice 99 GS400 sitting in my garage with a blown engine
But it's all good.
So now looking for a 99 GS400 engine with harness and ecu.
I can find plenty GS300 engines at reasonable price but GS400 are a little harder to find. Got a few quotes but want too see if anyone has one that they want too sell after a swap Preferably in Florida.
Tx
-Nuvat-
But it's all good.
So now looking for a 99 GS400 engine with harness and ecu.
I can find plenty GS300 engines at reasonable price but GS400 are a little harder to find. Got a few quotes but want too see if anyone has one that they want too sell after a swap Preferably in Florida.
Tx
-Nuvat-
#4
Pole Position
Thread Starter
Hey T,
Whats happening.
If it's the same place, GRIP in Melbourne, is also looking. I found several motors but all are out of state.
Was trying to find something in FL where I can pick it up. For some reason engines in FL cost 500 - 1000 more then the cost +shipping everywhere else in the country . Not sure why
I'll keep you posted.
-n-
Whats happening.
If it's the same place, GRIP in Melbourne, is also looking. I found several motors but all are out of state.
Was trying to find something in FL where I can pick it up. For some reason engines in FL cost 500 - 1000 more then the cost +shipping everywhere else in the country . Not sure why
I'll keep you posted.
-n-
#6
Pole Position
Thread Starter
I can actually get a 1J for the same price as a GS400 engine. The problem is the cost to put it in a GS400 is a lot more then putting the same 400 engine.
I pulled the motor out with a friend of mine and it's pretty much toast. I did find several engines in Texas, Cali and Alabama. Got someone on here also who has one for sale in MD. So just looking at my options right now.
What have you been up too?
-n-
I pulled the motor out with a friend of mine and it's pretty much toast. I did find several engines in Texas, Cali and Alabama. Got someone on here also who has one for sale in MD. So just looking at my options right now.
What have you been up too?
-n-
#7
Lexus Test Driver
iTrader: (4)
Join Date: May 2007
Location: Da hill fl
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
I can actually get a 1J for the same price as a GS400 engine. The problem is the cost to put it in a GS400 is a lot more then putting the same 400 engine.
I pulled the motor out with a friend of mine and it's pretty much toast. I did find several engines in Texas, Cali and Alabama. Got someone on here also who has one for sale in MD. So just looking at my options right now.
What have you been up too?
-n-
I pulled the motor out with a friend of mine and it's pretty much toast. I did find several engines in Texas, Cali and Alabama. Got someone on here also who has one for sale in MD. So just looking at my options right now.
What have you been up too?
-n-
Trending Topics
#8
Lexus Test Driver
OMG.....where were you guys when I needed the same thing last year????
I'm in dire need of a harness and ECU for the exact same car as the OP. If anyone knows of one, PLEASE let me know. I've been looking for almost 6 mos. with no luck.
I ended up building my original engine because I got 2 bad "used" motors here in GA. Now, all I need is the harness and I can get my girl back.
Any help would be appreciated and rewarded.
Good luck with your project OP. If you need any help, feel free to contact me......cause......I've TRULY been there done that and bought several T-shirts unfortunately....
I'm in dire need of a harness and ECU for the exact same car as the OP. If anyone knows of one, PLEASE let me know. I've been looking for almost 6 mos. with no luck.
I ended up building my original engine because I got 2 bad "used" motors here in GA. Now, all I need is the harness and I can get my girl back.
Any help would be appreciated and rewarded.
Good luck with your project OP. If you need any help, feel free to contact me......cause......I've TRULY been there done that and bought several T-shirts unfortunately....
#9
Pole Position
Thread Starter
Hey,
Found several engines in FL but they all want more then out of state ones. All good priced engines are either in TX or CA. Found about 4 engines but they all need to be shipped in.
BTW am working with another clublexus member who is replacing his complete motor with a 2J VVTi. However I do not know what state it will be since they are using some of the harness for the conversion.
He is suppose to let me know when I can pick it up. I'll PM you with pics once I have it.
-n-
Found several engines in FL but they all want more then out of state ones. All good priced engines are either in TX or CA. Found about 4 engines but they all need to be shipped in.
BTW am working with another clublexus member who is replacing his complete motor with a 2J VVTi. However I do not know what state it will be since they are using some of the harness for the conversion.
He is suppose to let me know when I can pick it up. I'll PM you with pics once I have it.
-n-
Thread
Thread Starter
Forum
Replies
Last Post
LexusLimit
2Gen GS430 / 400/ 300 Classifieds (98-05)
1
07-25-06 03:38 PM