View Poll Results: Help me decide on some iForged rims
iForged REVS
2
9.09%
iForged SPRINTS
8
36.36%
iForged SENEKAS
12
54.55%
Voters: 22. You may not vote on this poll
Help me decide on some iForged rims
#1
Lexus Champion
Thread Starter
Help me decide on some iForged rims
iForged REV
iForged SPRINT
iForged SENEKA
19x9s front and 19x10s rear
Any photochops of these on a black SC300/400 with a 1" drop would be great
iForged SPRINT
iForged SENEKA
19x9s front and 19x10s rear
Any photochops of these on a black SC300/400 with a 1" drop would be great
#6
Lexus Champion
Thread Starter
Originally posted by redgs4
X-Mas bonus? Must be that the cost of living is so much lower in TX than CA.
I dig the Senekas. Are you going to paint your car, too?
X-Mas bonus? Must be that the cost of living is so much lower in TX than CA.
I dig the Senekas. Are you going to paint your car, too?
#7
Lexus Champion
Join Date: Feb 2001
Location: CLUBLEXUS USA
Posts: 3,736
Likes: 0
Received 0 Likes
on
0 Posts
Definately go for the sprints ! WHY O WHY did I choose to look at this thread. Now I am even more undecisive about choosing which rims I wanna get. arghcnbuw
Hermosa, any idea how much lip those wheels gonna have? both for front and rear?
Hermosa, any idea how much lip those wheels gonna have? both for front and rear?
Last edited by D-MAN63; 11-18-03 at 06:32 AM.
Trending Topics
#9
Lexus Fanatic
Hey Guys...
After working some numbers with iForged, here's the deal...
On the GS or the SC, in 20"....the largest rear lip you can do is 3" (on the 3-piece which only comes in even 1/2" increments). With the 2-piece, you can do a 3"+ (about .25") on the GS...on the SC, it's 3"...
In 19", you can do a 3.5" lip due to the smaller size....now these are all w/o any fender mods whatsoever...
Of course, with fender mods, you can do a 20" with a 3.5"....with enough fender modding, you can do a 4" rear lip...
After working some numbers with iForged, here's the deal...
On the GS or the SC, in 20"....the largest rear lip you can do is 3" (on the 3-piece which only comes in even 1/2" increments). With the 2-piece, you can do a 3"+ (about .25") on the GS...on the SC, it's 3"...
In 19", you can do a 3.5" lip due to the smaller size....now these are all w/o any fender mods whatsoever...
Of course, with fender mods, you can do a 20" with a 3.5"....with enough fender modding, you can do a 4" rear lip...
#11
Lexus Fanatic
Easily. Offset isn't what you need to worry about so much...it's the disk setting and the spoke design. My iForged wheels cleared the AP Racing 6-piston setup I used to have which I think is the widest brake kit for Lexus.
They also easily cleared my StopTech 4-piston, 14" setup....
They also easily cleared my StopTech 4-piston, 14" setup....
Thread
Thread Starter
Forum
Replies
Last Post
DJ SprinklesNJO
Wheels, Tires & Brakes Forum
4
09-30-05 08:32 PM