Front Camber Kit
#1
Front Camber Kit
I recently lowered my car with RSR Downs and the rear camber / toe seems to be in spec.
Rear Camber: -1.6 and -2.2
Rear Toe: .13 and .12
However, my fronts seem to be out of spec:
Front Camber: -1.4 and -1.2
Front Toe: .05 and .03
Does anyone know if they sell front camber bolts? or anything I can do to adjust the fronts?
Rear Camber: -1.6 and -2.2
Rear Toe: .13 and .12
However, my fronts seem to be out of spec:
Front Camber: -1.4 and -1.2
Front Toe: .05 and .03
Does anyone know if they sell front camber bolts? or anything I can do to adjust the fronts?
Last edited by i2fat; 04-19-15 at 11:37 AM.
#2
Camber's good. Keep it the way it is. Out of spec but within the range most ppl like on performance cars (-1.0+). Tire wear will be slightly worse with higher negative cambers though. Personally, I would want the camber/toe to match left and right more than anything.
I also want to know what options are available for camber adjustment (more negative camber) . Ball-joint replacement is the only options? Can anyone confirm this?
I also want to know what options are available for camber adjustment (more negative camber) . Ball-joint replacement is the only options? Can anyone confirm this?
#3
http://shopfigs.com/v1/index.php?rou...tegory&path=89
check this link out....
likewise, the dealer told me we naturally have some inner wear due to camber form the factory. Its more or less expected to happen sooner or later aka a performance car.
check this link out....
likewise, the dealer told me we naturally have some inner wear due to camber form the factory. Its more or less expected to happen sooner or later aka a performance car.
#6
Driver School Candidate
Join Date: Dec 2014
Location: HI
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Looks ok for now but as soon as some quality front camber arms are available I would buy them. You'll probably have some premature tire wear until you get that front camber back in spec.
Thread
Thread Starter
Forum
Replies
Last Post