Rock-a-Lex

iTrader: (4)

So, I changed my front and rear pads today and installed a new brake hardware kit. However, I am not sure if I installed the brake pad clips properly. The car stops perfect, I have good pedal feel but there is a very faint hissing sound coming from the front when I apply the brakes. When I inspected both sides of the front brakes I noticed the the pad clips were flip flopped from drivers side to passenger side. Meaning the front of the caliper has a stubby curled end of the clip exposed and the back of the caliper has the larger rolled end of the clip exposed. Whereas the passenger side has the stubby curled end exposed on the back of the caliper (bottom) and larger rolled end is on the front of the caliper (top). A simple pic can help me out a million. Please help!

Rock-a-Lex

iTrader: (4)

No one has a pic of their front brakes without the tire on? Perhaps to show painted calipers?