GS400 Tom's advoxs coilovers installed Pics
#1
GS400 Tom's advoxs coilovers installed Pics
I will add more shots but I wanted to give you all some dumped shots at lowest settings but hell I could only get close to the lowest setting as I dont have a jack with a low enough profile to let the car down with after adjustments. Below are the pics of the coilovers (From Kipod tyvm) and the front wheel fitment with almost a half inch of drop still left to go but at this setting I couldnt get my low-profile scissor jack out my reg jacks are way to tall. Will take full body shots as soon as I can get a low profile jack that will fit under the vertex kit. The wheels are 19's BTW. Maybe ill put her up on some 2x6's and then try it but I think even then If i try for lowest setting the wood pieces will have to be small because the vertex kit will sit less than an inch off the ground. Stay tuned
And yes I know ls400 brake caliper upgrade coming soon Haha.
And yes I know ls400 brake caliper upgrade coming soon Haha.
Last edited by entryspeed; 03-04-11 at 07:45 PM.
Trending Topics
#8
USED Coils? not good bro, I had some TOMS i rode super low til the front shock blew out! however the Ride is comfy evan that low
but daym how old were these, look pretty rough?
* i guess mine blew due to rough driving ! just gotta take it easy on these
but daym how old were these, look pretty rough?
* i guess mine blew due to rough driving ! just gotta take it easy on these
#12
Lead Lap
iTrader: (2)
Join Date: Jun 2009
Location: NV
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Nice, these are my old coilovers. Here is how low they are all the way down.
Fronts bottomed out, rears had an inch or so to go...
BTW, I saw you post in the other thread on the spanner wrench. I never had one and neither did my buddy Wade that owned them before I did... but maybe the guy that sold them to Wade off eBay did. lol These coilovers are w h o r e s for sure...
Anyway, I just used a wrench like this in the middle.
If you have any questions about them, shoot me an email direct__products@hotmail.com
Fronts bottomed out, rears had an inch or so to go...
BTW, I saw you post in the other thread on the spanner wrench. I never had one and neither did my buddy Wade that owned them before I did... but maybe the guy that sold them to Wade off eBay did. lol These coilovers are w h o r e s for sure...
Anyway, I just used a wrench like this in the middle.
If you have any questions about them, shoot me an email direct__products@hotmail.com
Last edited by Newchapter; 04-25-11 at 01:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post