TruPlaya26

iTrader: (4)

Alright guys, I'm planning on getting the GF210's pretty soon but noticed that they don't list the GS430 as one of the applications for it, only the GS300 ('98-'05). Now I've heard that they will still work perfectly on the 430 and there will be no problems, has anyone done this? any suggestions?

-I should also mention that I'm going to be using these on the stock shocks/struts and stock 16" wheels ...

Also, there is another thread going on about whether or not to cut the bump stops, is this recommended for the GF210's on my 430 or not? if so, how much should be cut?

AYEmike

the springs will work for all gs models 98-05, if you're planning to get gf210s; you might want to consider buying new struts too. the strut you run on now will blow quick once you drop your gs on gf210s. and as for the 16" stock wheels, they will sit fine.

TruPlaya26

iTrader: (4)

Really? You think they would blow quick? One of the guys from Tanabe said I should be just fine with the stock shocks/struts

-btw I only have about 48k miles on the odo ...

AYEmike

yeah basically, if the springs drop your car 1-2 inch, you'll blow your stock strut quick. so think about buying new struts for them gf210s too.


you talk to the tanabe guy over the phone or what.

aznminivan

nice hair infamous hows your moms gs doing

TruPlaya26

iTrader: (4)

Nope, talked to him thru PM, ok so what struts you suggest for the GF?

AYEmike

i would get kyb gr-2 or bilstein, get bilstein sport since the springs will drop you around 1-2 inches, they hold up better. kyb is kinda like stock replacements.

TruPlaya26

iTrader: (4)

Ok, thanks for all the help guys ...

ZippyGuy

iTrader: (9)

The GF and bilstein SP or KYB's are going to set you up nicely. I would consider getting rid of those stock 16. At a minimum I wouls suggest the stock 17 spoke wheels, that will set your new drop off very nicely while keeping the stock look.