Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

92 SC400cruise not working after alam install - help!

Thread Tools
 
Search this Thread
 
Old 03-29-17, 09:11 PM
  #1  
Returd
Intermediate
Thread Starter
 
Returd's Avatar
 
Join Date: Jan 2017
Location: Ontario
Posts: 426
Received 17 Likes on 15 Posts
Default 92 SC400cruise not working after alam install - help!

I'm leaving on a trip tomorrow and need some urgent help re cruise control.

I had the entire interior out to run wires for a stereo and alarm system.

Alarm works fine. Double din nav unit works awesome

Got a check engine light and no cruise control.

Ia it possible I left something unplugged? I notice my traction control button doesn't seem todo anything.

Oh, prior to pulling the interior cruise did work.

I'm leaving tomorrow on a long trip sop cruise would be nice.
Old 03-30-17, 05:48 AM
  #2  
Returd
Intermediate
Thread Starter
 
Returd's Avatar
 
Join Date: Jan 2017
Location: Ontario
Posts: 426
Received 17 Likes on 15 Posts
Default

So I figured it out.

I pulled codes, nothing. I consulted the manual and found the idiot light was "Ebrake" nt check engine.

Not wanting to pull the console, I grabbed a long drift, found the tang that depresses the switch to indicate brake on and "perswaded it with a couple hammer blows.

I'm proud to say i fixed my cruise control with a hammer.
Old 03-30-17, 09:11 PM
  #3  
Returd
Intermediate
Thread Starter
 
Returd's Avatar
 
Join Date: Jan 2017
Location: Ontario
Posts: 426
Received 17 Likes on 15 Posts
Default

Well I put on 600 miles today, a good portion using cruise control. I’m pretty sure I would have taken an alternative vehicle on this trip without cruise. I did have some issues getting the climate control to work. Time for another thread….
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AL13NV8D3R
GS - 4th Gen (2013-2020)
4
11-20-18 10:43 PM
slun
GS - 3rd Gen (2006-2011)
0
12-17-17 06:42 PM
nakman8
RX - 1st Gen (1999-2003)
12
09-08-11 10:23 AM
SC300-95-TMM
SC- 1st Gen (1992-2000)
4
10-26-07 08:35 PM



Quick Reply: 92 SC400cruise not working after alam install - help!



All times are GMT -7. The time now is 09:35 PM.