SC430 - 2nd Gen (2001-2010)

Higher Mileage - What is needed for a refresh

Thread Tools
 
Search this Thread
 
Old 09-28-14, 08:08 AM
  #1  
britsti
Driver School Candidate
Thread Starter
 
britsti's Avatar
 
Join Date: May 2004
Location: Massachusetts
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default Higher Mileage - What is needed for a refresh

Guys on higher mileage sc430's, say 100,000 miles + what approach makes sense to refresh the car for handling, ride, steering feel etc.?

Assuming basic maintenance is up to date.

Lower control arms
Steering bushings
Alignment
New wheels / no runflats
Shocks/springs

-Anything else?

Thanks.
Old 09-28-14, 08:24 AM
  #2  
DarthSid
Pole Position
 
DarthSid's Avatar
 
Join Date: Feb 2009
Location: CA
Posts: 357
Likes: 0
Received 4 Likes on 3 Posts
Default

Originally Posted by britsti
Guys on higher mileage sc430's, say 100,000 miles + what approach makes sense to refresh the car for handling, ride, steering feel etc.?

Assuming basic maintenance is up to date.

Lower control arms
Steering bushings
Alignment
New wheels / no runflats
Shocks/springs

-Anything else?

Thanks.
Also consider the front and rear sway bar upgrade with bushings.
Refer to bacardi11 thread on sway bar.
Old 09-28-14, 06:48 PM
  #3  
bb430
Lead Lap
iTrader: (1)
 
bb430's Avatar
 
Join Date: Mar 2007
Location: TX
Posts: 556
Likes: 0
Received 4 Likes on 4 Posts
Default

Look into your engine mounts and transmission mount. I would also seek a shock tower brace.
Old 12-30-14, 01:12 AM
  #4  
kuWuPt
Advanced
iTrader: (13)
 
kuWuPt's Avatar
 
Join Date: Oct 2006
Location: NC
Posts: 636
Received 93 Likes on 44 Posts
Default

- sway bar endlinks
- Transmission flush
- Brake fluid flush
- power steering flush
- differential fluid flush
- ball joints
- inner & outter tie rods
Old 12-30-14, 03:43 AM
  #5  
LexBrett
Lexus Test Driver
 
LexBrett's Avatar
 
Join Date: Apr 2013
Location: Virginia
Posts: 1,076
Likes: 0
Received 13 Likes on 12 Posts
Default

Other suggestions:
-transmission filter
-spark plugs
-MAF sensor cleaning
-thermostat replacement
-radiator cap replacement
-throttle body cleaning
-fuel injector cleaning/upper engine via gas tank and vacuum line
Old 12-30-14, 05:48 AM
  #6  
kuWuPt
Advanced
iTrader: (13)
 
kuWuPt's Avatar
 
Join Date: Oct 2006
Location: NC
Posts: 636
Received 93 Likes on 44 Posts
Default

Just making a combined list:

- Lower control arms
- Steering bushings
- Alignment
- New wheels / no runflats
- Shocks/springs
- front and rear sway bar upgrade with bushings.
- engine mounts and transmission mount
- sway bar endlinks
- Transmission flush
- Brake fluid flush
- power steering flush
- differential fluid flush
- radiator flush
- ball joints
- inner & outter tie rods
-transmission filter
-spark plugs
- spark plug grommets
-MAF sensor cleaning
-thermostat replacement
-radiator cap replacement
-throttle body cleaning
-fuel injector cleaning/upper engine via gas tank and vacuum line


Also at 100k if not done you'd probably want to look at:
- timing belt
- waterpump
- tensioners
- pulleys
- valve cover gaskets
- front main seal

lets keep updating this list if anyone can think of anything else.. maintenance related..
Old 12-30-14, 06:10 AM
  #7  
Bon
Advanced
 
Bon's Avatar
 
Join Date: Sep 2009
Location: KC, MO
Posts: 704
Likes: 0
Received 25 Likes on 19 Posts
Default

To maintain factory performance: shocks yes, springs no. While doing the timing belt, in addition to the aforementioned items I'd replace the upper and lower radiator hoses as well as the serpentine belt. If the brakes are anywhere near due then it's a great time to take care of them while working on the suspension.
Old 12-30-14, 07:57 PM
  #8  
jonsc430
Driver School Candidate
 
jonsc430's Avatar
 
Join Date: Dec 2014
Location: edmond oklahoma
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default maintenace

I agree with every post. my sc430 has 237k miles. replace upper control arms, lower ball joints, around 173k along with struts front and rear. trans flush , and trans flush again. but ill tell you I bought all my parts on line. had a friend help install then took to hibdons for alignment. I would hate to see what the dealer would charge for all that. ouch. good luck.
Old 12-31-14, 07:56 AM
  #9  
kjcole
Lead Lap
 
kjcole's Avatar
 
Join Date: Jun 2011
Location: Iowa
Posts: 541
Likes: 0
Received 7 Likes on 7 Posts
Default

I agree with all that has been said - but many of the suspension items that involve ball joints, bushings, etc should be checked for deterioration and/or sloppiness before I'd change things out completely. E.g., if the tie rod ends are tight, no need to change just because of mileage. Now I'm speaking for those among us with several kids in college, and therefore with a tight budget. If you can afford to sweep through everything and do proactive/preventative maintenance - go for it.
Old 12-31-14, 01:38 PM
  #10  
paige
Rookie
 
paige's Avatar
 
Join Date: May 2007
Location: Atlanta,GA
Posts: 49
Likes: 0
Received 1 Like on 1 Post
Default

All bushes. Ball joints!!!! Those control arms! I will say it again. Those big donut front control arms and new ball joints. You will be happy. Tires are just like brake pads. They get eaten. Happy new year.
Old 12-31-14, 02:44 PM
  #11  
Bon
Advanced
 
Bon's Avatar
 
Join Date: Sep 2009
Location: KC, MO
Posts: 704
Likes: 0
Received 25 Likes on 19 Posts
Default

I've had several experiences with Toyota ball joints being bad and causing steering problems but never showed any outward signs of failure or severe wear. They didn't groan, squeak or grind. When removed they didn't feel sloppy in their sockets. I would have sworn that they were good. WRONG!! My Sienna and my SC both responded wonderfully. Steering sloppiness and shakes both disappeared. My Sienna has 112K miles and my SC has but 61K miles. Again, the results were amazing.
Old 01-02-15, 08:58 AM
  #12  
LexBrett
Lexus Test Driver
 
LexBrett's Avatar
 
Join Date: Apr 2013
Location: Virginia
Posts: 1,076
Likes: 0
Received 13 Likes on 12 Posts
Default Steering bushing make a difference?

Does changing out the steering bushings really make a difference? I'm in the process of upgrading sway bars, end links, and bushings and have been considering doing the steering bushings as well. Thoughts?
Old 01-03-15, 01:25 AM
  #13  
kuWuPt
Advanced
iTrader: (13)
 
kuWuPt's Avatar
 
Join Date: Oct 2006
Location: NC
Posts: 636
Received 93 Likes on 44 Posts
Default

I think so, you will have less play in the steering wheel. Made a huge difference in my old GS300 so ordered it for the SC as well. Figs engineering's makes the poly bushings http://shopfigs.com/v1/index.php?rou...product_id=220
Old 01-03-15, 04:25 PM
  #14  
LexBrett
Lexus Test Driver
 
LexBrett's Avatar
 
Join Date: Apr 2013
Location: Virginia
Posts: 1,076
Likes: 0
Received 13 Likes on 12 Posts
Default

I don't really feel any play in my steering wheel, but maybe I just don't notice it..
Old 01-05-15, 01:25 AM
  #15  
kuWuPt
Advanced
iTrader: (13)
 
kuWuPt's Avatar
 
Join Date: Oct 2006
Location: NC
Posts: 636
Received 93 Likes on 44 Posts
Default

Steering rack bushings are the only item that mounts your power steering rack to your chassis. Any forward or lateral movement of this steering rack - even the most minute - can cause noticeable changes in toe and other alignment settings... with higher mileage cars it would be worth it to go ahead and change. I haven't changed it in my GS430 but in my GS300 when I had changed it, the steering felt great.. I was having a lot of play in it prior.


Quick Reply: Higher Mileage - What is needed for a refresh



All times are GMT -7. The time now is 08:15 AM.