P1351 VVT Sensor Range/Performance Problem (Bank 2)
This sensor related to timing (VVT= 'variable valve timing').
The 302 code is for an engine misfire - these two are probably linked. This misfire is causing your engine to shake.
I'm wondering if everything got put back together (especially connectors to sensors that were disconnected)?
Toyota C1201 ABS Inlet Valve Coil LF Circuit Short To Ground???
Can be related to an 02 sensor problem or this:
C1201 trouble code is common on lexus when the brake pads wear out and the the caliper pistons extends to maximum. It will cause the brake fluid to drop and the brake fluid level sensor is activated. Once the bake fluid level sensor is activated for more then 4 seconds, It will set the code C1201 in the system. Check the brake fluid if it is at minimum. Even though the light may not be on but when you go up / down hill it will illuminate for more than 4 seconds and that is what trigger the trouble code. By adding a little fluid and resetting the code you can prove that this may or may not be the probem. However to fix the problem , check and replace the brake pads as neccessary. Only then top up the fluid level to the maximum level , reset the trouble code and that should get rid of the trouble code till next brake job.
Read more at: http://www.obd-codes.com/forums/view...php?f=1&t=6811
Copyright © OBD-Codes.com