Major Gauge Cluster Problem
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: in
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Major Gauge Cluster Problem
Soooo havnt found much searching for all the problems i have. 93 SC300 1JZ swap. Shortly after removing the radio the lights speedo and tach are all non working. (The slap the dash doesnt work) The temp gauge works as its grounded to the chassis (1j swap) but none of the other gauges(cant confirm whether fuel gauge works). The clock works if in the acc. position but not in the run position, and the odo doesnt ever come on either. I dont think this could be a "rebuild cluster" type thing but i could be wrong. Any point in the right direction for testing would help.
Last edited by hostilesc; 09-10-15 at 07:03 PM.
#3
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: in
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
forgot to mention the gauge fuse is good power to both sides. went to check the radio fuses and i pulled the cover off the under hood fuse box and went inside to test my test light on the battery and the gauge lights worked. turn key off then back on and back to nothing. both radio fuses check out good at least where the fuse is theres power. the lights working then shutting off after an ignition cycle scares me i may be ****ed with wiring nightmares
Thread
Thread Starter
Forum
Replies
Last Post
groverwood
SC- 1st Gen (1992-2000)
18
10-04-12 08:27 AM
mr29rose
SC- 1st Gen (1992-2000)
6
06-19-10 05:57 PM
shuiyuan
ES - 1st to 4th Gen (1990-2006)
13
01-16-08 06:56 PM