aldizzurp

Sorry this might be a dumb question but I just wanted to make sure I'm doing this the easiest way possible.

I'm trying to replace my '95 SC300's fog lights right now & was wondering if I have to take the whole front bumper out or straight up pop the fog light housing out?

Thank you in advance.

endodonist

i took off the splash guards in front of the tires, then there were 2 nuts on the side and one small bolt on the top of each fog light, it should then come out through the front.

88supramki

If you can't get it to work that way, you can take the headlight out as well and reach directly down to the fog light.

horent135

iTrader: (10)

Do what Endodonist says, or u can take out ur front wheel to make it easier access. Or just turn your wheel to access the splash guards.

CrazySC300

iTrader: (16)

I agree with 88Supramki, Removing the headlights is by far the best,easiest and practical method in removing the foglights, By going through the splash guard method, You're still going to have to deal with AC lines on the driver's side and accessing the foglights through there will be tedious and cumbersome...definitely go with the headlight removal method.

Teal Sc400

Post 9 is the way I do it.
https://www.clublexus.com/forums/sc-...ght-bulbs.html

OG Dada

iTrader: (10)

This have been brought up a few hundred times already, but I find the easiest way to remove it is through the lower splash guards/fender liner, then outie with the headlight then you can access the fogs with ease..

net4n6

iTrader: (1)

It took me a long time to searched for "how to remove the fog lights". I found this thread and wanted to bring it back to life just in case someone need it.