Please Help!! Lighting issue
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: Florida
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Please Help!! Lighting issue
My 1992 sc300 taillights will not work while the head lights are on,break lights work perfectly fine,tried new bulbs an checked all the fuses an still no luck. If anyone has any suggestions please feel free and thank you.
#2
Lead Lap
iTrader: (1)
thats interesting... have u checked your wires for any shorts or breaks? also possible switch malfunction but very unlikely... ima suggest just changing the parking light fuse with a new one incase the fuse u have now is bad and u cant see it (has happened to me many times)
also are your front parking lights turning on? if not then its most likely the fuse
also are your front parking lights turning on? if not then its most likely the fuse
#5
Lead Lap
iTrader: (1)
the fuse for the parking light is in the side panel on the driver side
ull have to move ur carpet and the fuse box is twords the lower front of the car
so its like ur reaching in into the car. its placed very badly in my opion but anyway hopefully u have the fuse cover and it will tell which fuse is to the parking light, im not sure of it off hand but ill be by my car later and post back with the number if i dont hear from you later
hope that helps
ull have to move ur carpet and the fuse box is twords the lower front of the car
so its like ur reaching in into the car. its placed very badly in my opion but anyway hopefully u have the fuse cover and it will tell which fuse is to the parking light, im not sure of it off hand but ill be by my car later and post back with the number if i dont hear from you later
hope that helps
#6
Lead Lap
iTrader: (1)
did a lil search cuase im bored at work and found a picture of the fuse box the fuse u want to check is the tail light fuse (17) also while your in there u might wana check the cig fuse (7) cuz on sum cars parking lights are related to the cig idk bout the sc tho
hope this helps
hope this helps
#7
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: Florida
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I just pulled the cig fuse out but its fine :/ an ive tried the other fuses like stop,turn,tail still no luck,Ive been hearing alot about a diode or w/e so with my luck I go to look for it and I don't have one... an i even looked under the carpet to make sure it didnt fall out but nothing.
REALLY appreciate your help btw!!!
REALLY appreciate your help btw!!!
Trending Topics
#11
Check your tail light failure sensor, its a yellow or black square box located in the trunk near the antenna but more towards the gas tank, you need to pull the gas tank carpet and the left cover i think. (You should be able to find it pretty easily in that area, i cant remember 100% where it is) unplug it and open it up, see if you have a hole in it or it looks burned.
Also make sure you have the correct bulbs, i confused the 1156 and 1157 before and blew out a couple of those sensors. I was having the exact same problem as you, headlights worked, tails didnt but brake lights did. Got pulled over twice, wasnt fun.
Also make sure you have the correct bulbs, i confused the 1156 and 1157 before and blew out a couple of those sensors. I was having the exact same problem as you, headlights worked, tails didnt but brake lights did. Got pulled over twice, wasnt fun.
#13
Driver School Candidate
Join Date: May 2011
Location: California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
did you ever figure out your issue? Im having the same problem...my sensor keeps frying and had to replace it a few times. Is it because the running tail light bulbs? or should i just bypass the sensor completely? does anybody know how to bypass the sensor? Please help
#15
Driver School Candidate
Join Date: Jun 2014
Location: South Carolina
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
do u remember which fuse u replace for the license plate n tail?
Thread
Thread Starter
Forum
Replies
Last Post