Cracked key shell casing - help needed
#92
Driver School Candidate
BTW, Lexus dealers around me take offense you bought a key off EBay, so won't cut any keys other than their own. Maybe if I offered the key cutting employee cash in person, but I have other options at my disposal.
Last edited by beachlover; 11-21-14 at 11:52 AM.
#93
To update: Got the key cut @ the local Ace, cost $2.
The key will not turn the switch, when I inspect it, it doesn't look identical.
Here's an issue:
I use the existing key, the ignition turns fine.
When I insert the newly cut key, it doesn't turn the ignition. I remove it.
I can use the newly cut key at the door to lock/unlock, but it will not turn the ignition (ignition switch stuck in 'lock' stage).
I insert the existing working key, and the ignition is locked!!
Any idea what's going on here?
I wiggle the key in the switch for ~30 seconds, then all of a sudden it releases the lock and I can turn on the engine.
I'll just buy a new shell from Amazon/Ebay and have the dealer cut it. Wasted $7...
The key will not turn the switch, when I inspect it, it doesn't look identical.
Here's an issue:
I use the existing key, the ignition turns fine.
When I insert the newly cut key, it doesn't turn the ignition. I remove it.
I can use the newly cut key at the door to lock/unlock, but it will not turn the ignition (ignition switch stuck in 'lock' stage).
I insert the existing working key, and the ignition is locked!!
Any idea what's going on here?
I wiggle the key in the switch for ~30 seconds, then all of a sudden it releases the lock and I can turn on the engine.
I'll just buy a new shell from Amazon/Ebay and have the dealer cut it. Wasted $7...
#95
Driver School Candidate
Join Date: Nov 2014
Location: GA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
To update: Got the key cut @ the local Ace, cost $2.
The key will not turn the switch, when I inspect it, it doesn't look identical.
Here's an issue:
I use the existing key, the ignition turns fine.
When I insert the newly cut key, it doesn't turn the ignition. I remove it.
I can use the newly cut key at the door to lock/unlock, but it will not turn the ignition (ignition switch stuck in 'lock' stage).
I insert the existing working key, and the ignition is locked!!
Any idea what's going on here?
I wiggle the key in the switch for ~30 seconds, then all of a sudden it releases the lock and I can turn on the engine.
I'll just buy a new shell from Amazon/Ebay and have the dealer cut it. Wasted $7...
The key will not turn the switch, when I inspect it, it doesn't look identical.
Here's an issue:
I use the existing key, the ignition turns fine.
When I insert the newly cut key, it doesn't turn the ignition. I remove it.
I can use the newly cut key at the door to lock/unlock, but it will not turn the ignition (ignition switch stuck in 'lock' stage).
I insert the existing working key, and the ignition is locked!!
Any idea what's going on here?
I wiggle the key in the switch for ~30 seconds, then all of a sudden it releases the lock and I can turn on the engine.
I'll just buy a new shell from Amazon/Ebay and have the dealer cut it. Wasted $7...
When I got my key cut, it would turn the ignition, but it was just act like it wasn't getting any gas. But if I held the old key nearby, or put the electronics in the new shell, it would work.
Maybe they just need to run through the cut one more time. Might just be slightly off, especially since you say it doesn't look identical.
Last edited by Cacophony; 11-24-14 at 03:46 AM.
#96
Driver School Candidate
Join Date: Nov 2014
Location: GA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
They don't have storefronts anymore. They say they'll come to you and cut the key. I guess that's part of the service charge.
And my dealer wanted at least $50.
I just didn't wanna pay that much for a dumb key, since I already had the electronics.
#98
I just ordered another shell from Amazon for $5, I'll just get it cut @ the dealer, they charge $25.
#99
Driver School Candidate
Join Date: Sep 2011
Location: California
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Did you program the car to recognize the key? When I got mine, I had to go through a dance of lock, unlock, lock unlock, turn key, etc before the RX300 would accept the key.
#100
Probably because you got new electronics with the new key.??
Most people in this thread are swapping the existing electronics over to the new key shell so no programming is necessary
Most people in this thread are swapping the existing electronics over to the new key shell so no programming is necessary
#102
A BTDT, don't want to repeat, but my sister has a 99 RX-300 and a 2004 RX-330. I was driving the latter on mission for airport pickup. I had grabbed a "valet" key in addition to remote key fob. Upon coming out of local bank, I took the valet key and put it in the ignition, and it kinda turned, but not activating starter. Turned out valet key was for RX-300 and it would NOT come out of ignition. Much time and calls ensued and idiot brother hadn't paid AAA, so eventually (hours) a flat bed arrived to tow to dealer (no help on Lexus 800# or two Lexus dealers). Tow guy maintained he could't get onto truck because ignition lock was engaged and left me So....girlfriend drove me the ~40 mile round trip to pick up RX-300 to complete pickup. A local locksmith had idea to lube it with WD-40 (trip to my house) and eventually RX-300 valet key released from RX-330 ignition. Now keys are labeled!
#103
Got the $5 amazon key cut by Lexus for $25, worked right away. Learned my lesson with the amateurs from Ace Hardware...
Thread
Thread Starter
Forum
Replies
Last Post