rx330 dual exhaust
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2013
Location: ma.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
rx330 dual exhaust
ok i looked under my rx and said i think i can fit another stock resonator on the left side to copy the right side and give the lexus rx 330 dual exhaust like it really should have . i bought one off of ebay used for $94 delivered to my house bought some universol weld on hangers and some rubber hangers used just like on the right side now i am a do it yourself mig welder at home lots of experience so you will need that part for the job but can easily be done and i think looks great and i have it hooked up to the true exhaust as well i dont know how to post pics here but i will put in my album and i will post them in photos section 4/28/2013
#3
Two things. Make sure wherever you weld on that side does not burn anything on the interior (Carpet). Secodnly, I would invest in some heat shielding and place it appropriately.
Trending Topics
#9
What other guys said, too low and the tips are out too much...I first thought at reading your first post you were going for the stock look but with a dual tip look. What muffler did you use?
#11
Driver School Candidate
I'm sorry, but I have to agree with most. Those tips are a little too long. They stick out just a little too much. I don't mind tips being visible, but that is taking it to another level.
#13
Driver School Candidate
Thread Starter
Join Date: Apr 2013
Location: ma.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
i used the same stock resonator thats on the right side stock it dosnt sound any different from stock i wasnt looking for noise on this application i have 3 muscle cars and this is my take it easy luxury ride and i love it
#14
Driver School Candidate
Thread Starter
Join Date: Apr 2013
Location: ma.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
thank you diverchris for the compliment very much appreciated!!! i was just mocking this up to see if it was doable and used supplies around my garage to mock this up i didnt spend any money accept for the used resonator i bought off of ebay and i have used alot of information for regular routine maintenance from alot of posters on here and i thought i would just show and give ideas to others to show it can be done with very little money and add a nice to touch to personalize our rx from others since in my area i never seen anyone with duals on the rx anyways i am not even going to comment on the others with there comments and thoughts and probably wouldnt even know to do with wrench if was handed to them enough said i am posting more pics rx330 dual exhaust cont. of my final results with spending a little more money on supplies knowing that it was and is going to work and look great too!!!
#15
thank you diverchris for the compliment very much appreciated!!! i was just mocking this up to see if it was doable and used supplies around my garage to mock this up i didnt spend any money accept for the used resonator i bought off of ebay and i have used alot of information for regular routine maintenance from alot of posters on here and i thought i would just show and give ideas to others to show it can be done with very little money and add a nice to touch to personalize our rx from others since in my area i never seen anyone with duals on the rx anyways i am not even going to comment on the others with there comments and thoughts and probably wouldnt even know to do with wrench if was handed to them enough said i am posting more pics rx330 dual exhaust cont. of my final results with spending a little more money on supplies knowing that it was and is going to work and look great too!!!