Wheel spacer size..
#1
Wheel spacer size..
Hi I'm trying to see what size wheel spacers would work well on a 09 rx350 seven spokes? Just wanna see what people have used and would recommend. I'm thinking 10mm front and 20 rear unless someone has some input they'd like to share? Thanks!
#2
25 mm Front 30 mm Rear, I suggest, been thinking about this too.
#4
Driver School Candidate
Join Date: May 2018
Location: VA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I went with 25mm front and 38mm rear for a completely flush stance. Don't forget to take a wire brush or wheel to gently clean the hub for a completely clean contact with the hub and spacer. Also thread locker blue for the spacers to the hub. Tighten to 100 ft.lbs for both spacer and wheel.
#5
I use the 76 ft-lbs torque and I do not use a thread locker.
#6
Ended going with a 5mm front and 25mm rear but I also put on the 3rd gen rx 19in 7 spokes that are wider and have lower offset than my previous oem wheels. Very flush with fenders now looking great. Had to go to 2 different installers bc the first one didn’t know what he was doing it would vibrate.
#7
35 mm Spacer in the RR
Last edited by mandyfig; 06-28-19 at 01:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
GRANYZ400
Suspension and Brakes
8
02-04-13 10:57 AM
BUSTN
Wheels, Tires & Brakes Forum
5
08-17-06 07:22 AM