Question on the HID autoleveling
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2006
Location: CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Question on the HID autoleveling
I got my RX350 on MAy06. At first i noticed that everytime when i turn on the headlights, i would see the light move around like they're doing adjustment or something. But now I don't see them moving when i turn on the headlights anymore. Anyone know is this normal? Are the headlight supposed to do the adjusting everytime I turn on the headlight? your answer is much appreciate.
#2
They do go through an adjustment cycle when you turn on the headlights, and they steer through turns when exceeding 18 mph and stop when speed reaches 3 mph. There is a disable switch but if that is activated you would see an AFS OFF warning light on the dash. If they have failed, there should be a warning message. It's all explained in the manual.
#4
RX_brain--'May be the same on mine--never turned them on manually where I can observe it, but on Auto when starting the car in the garage, they always go through a cycle. Thanks for the info.
#5
Driver School Candidate
Thread Starter
Join Date: Jul 2006
Location: CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
thank you all for the answers, i tried leave the HL to auto and turn on the car, but the HL still didn't go to the adjusting cycle. I remember my HL went through the cycle when I turned it on manually, but now the manual way wouldn't work either. If I reset the ECU would it fix the problem?
#6
I've only noticed this adjustment happening when the lights are "on" (or "Auto" in a dark place, like a garage) when the car is first turned on. It's also more dramatic if the car is not on a level surface, like a driveway that slopes down toward the street.
Otherwise, I don't notice anything.
Otherwise, I don't notice anything.
Last edited by rxdriver; 10-07-06 at 06:04 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
kl323
IS - 2nd Gen (2006-2013)
23
10-24-19 06:53 PM