Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Lexus IS Lighting Guides
- Lexus: How to Install Halo Headlights
Step by step instructions for do-it-yourself repairs
Browse all: Lexus IS Lighting Guides
HALO Headlight, Clear side marker and LED rear reflector light installed
#1
Lexus Test Driver
Thread Starter
HALO Headlight, Clear side marker and LED rear reflector light installed
I installed the HALO PROJECTOR HEADLIGHTS HEADLAMPS CHROME. I tapped the parking light power source for Halo lamp wires. I used HID for low beam light. I replaced the oem front and rear side markers with clear lens with blue leds. Our RX's has two(2) rear red reflectors R/L without bulb. For the RX 330 and up Lexus uses bulb. So I replaced those with RED LED PARKING/ BRAKE LIGHT. I used the taillights for power source those lights . I have to open the rear bumper cover and trunk trims on both sides. I used the same way out the rear side marker cable goes. Here is some pics.
#5
Driver School Candidate
Join Date: Jun 2011
Location: Oklahoma
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Nice. Where did youy giet those clear side markers? They look great. I put halos on another car of mine and they weren't as bright as I wanted. I really like your LED bottom reflectors and duel tips. I'm not one for blue lights but to each his own. I would put an amber light in there thogh. It lookds like form the pics provided, your chrome finish on the headlights might muttle some of your light into what looks like someoone driving with brights on. Car looks good. I haven't seen many with in that color.
F
F
#6
Lexus Test Driver
Thread Starter
Thanks. I bought those light from e-bay. Here is the link: http://cgi.ebay.com/ebaymotors/ws/eB...#ht_3981wt_939
#7
Instructor
Where did you get the RED led bumper lights?
I hope the clear corners are better quality these days.
I purchased some just like these from my gs 300 and they leaked and turned colors withing a few months
I hope the clear corners are better quality these days.
I purchased some just like these from my gs 300 and they leaked and turned colors withing a few months
Trending Topics
#9
Lexus Test Driver
Thread Starter
I bought this red led rear reflector light from following: http://cgi.ebay.com/ebaymotors/ws/eB...ht_3806wt_1014
#11
#12
i thought these markers would be like the older bmw car how you could gently slip over and use a flat-head and pop them out. will i be having to remove a fender or bumper of any sort to get these markers off
#13
Lexus Test Driver
Thread Starter
nop it was easy. Here is the details: Crawl under the wheel well of the side you will be replacing the side marker light. Remove the three screws from the wheel well, close to the fender.
Remove the two bolts on the edge of the fender. Remove the three bolts from under the bottom of the wheel well. Remove the three screws from the cowling, in front of the wheel well, and pull down the cowling.
Reach into the vehicle, and remove the side marker bulb, by rotating it, counterclockwise. Install a replacement bulb.
Push the cowling back into its original position, and reinstall the three screws to the cowling. Reattach the three bolts to the wheel well and two bolts to the fender.
Reinstall the three screws, to secure the wheel well.
Remove the two bolts on the edge of the fender. Remove the three bolts from under the bottom of the wheel well. Remove the three screws from the cowling, in front of the wheel well, and pull down the cowling.
Reach into the vehicle, and remove the side marker bulb, by rotating it, counterclockwise. Install a replacement bulb.
Push the cowling back into its original position, and reinstall the three screws to the cowling. Reattach the three bolts to the wheel well and two bolts to the fender.
Reinstall the three screws, to secure the wheel well.
#14
nop it was easy. Here is the details: Crawl under the wheel well of the side you will be replacing the side marker light. Remove the three screws from the wheel well, close to the fender.
Remove the two bolts on the edge of the fender. Remove the three bolts from under the bottom of the wheel well. Remove the three screws from the cowling, in front of the wheel well, and pull down the cowling.
Reach into the vehicle, and remove the side marker bulb, by rotating it, counterclockwise. Install a replacement bulb.
Push the cowling back into its original position, and reinstall the three screws to the cowling. Reattach the three bolts to the wheel well and two bolts to the fender.
Reinstall the three screws, to secure the wheel well.
Remove the two bolts on the edge of the fender. Remove the three bolts from under the bottom of the wheel well. Remove the three screws from the cowling, in front of the wheel well, and pull down the cowling.
Reach into the vehicle, and remove the side marker bulb, by rotating it, counterclockwise. Install a replacement bulb.
Push the cowling back into its original position, and reinstall the three screws to the cowling. Reattach the three bolts to the wheel well and two bolts to the fender.
Reinstall the three screws, to secure the wheel well.
#15
nop it was easy. Here is the details: Crawl under the wheel well of the side you will be replacing the side marker light. Remove the three screws from the wheel well, close to the fender.
Remove the two bolts on the edge of the fender. Remove the three bolts from under the bottom of the wheel well. Remove the three screws from the cowling, in front of the wheel well, and pull down the cowling.
Reach into the vehicle, and remove the side marker bulb, by rotating it, counterclockwise. Install a replacement bulb.
Push the cowling back into its original position, and reinstall the three screws to the cowling. Reattach the three bolts to the wheel well and two bolts to the fender.
Reinstall the three screws, to secure the wheel well.
Remove the two bolts on the edge of the fender. Remove the three bolts from under the bottom of the wheel well. Remove the three screws from the cowling, in front of the wheel well, and pull down the cowling.
Reach into the vehicle, and remove the side marker bulb, by rotating it, counterclockwise. Install a replacement bulb.
Push the cowling back into its original position, and reinstall the three screws to the cowling. Reattach the three bolts to the wheel well and two bolts to the fender.
Reinstall the three screws, to secure the wheel well.
Thanks.