Got my teins
#1
Driver
Thread Starter
Join Date: Jul 2005
Location: hawaii
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Got my teins
sorry their not the best pics, but didnt really have time to go take better ones. its on s-techs with the stock shocks. overall the drop is pretty noticable. as far as the ride goes, its a little bouncier than the stock setup but not that bad. doesnt matter though, i will be getting airrunners and fabulous kit shortly. I will keep you guys posted
#3
Lexus Test Driver
That is hot! What is the drop (in inches) given on the product box or description? Usually it takes a week or a few for the springs to fully set in so you'll probably notice it settle some more. Just looking at both your RX's (LiqrSicc) makes me want to drop too!
-tc
-tc
#5
Driver
Thread Starter
Join Date: Jul 2005
Location: hawaii
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
haha thanks. um i think the drop is about 2.5 inches all around. I'm not quite sure. the drop is really really noticiable to me, but not to other people i guess. i actually took the pics about 2 weeks after i put them in so I think its settled all the way. Not as low as I hoped it would go. I was going to put in a order for airrunners but judging by the pictures, I dont think I'll be able to tuck, so I think I might pass. I am working with another company for air suspension though, so I'll keep you guys updated
#6
Trending Topics
#8
Super Moderator
I like how you removed the Lexus and the RX300 on the back. The rear L takes a little more doing as there are two holes there, but thank you for the picture as I always wondered what that might look like on white.
#9
Driver
Thread Starter
Join Date: Jul 2005
Location: hawaii
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
#10
Driver
Thread Starter
Join Date: Jul 2005
Location: hawaii
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
at first i debadged only the lexus and the rx300 and proceeded to the L. only after i took it off i noticed that there were holes. haha so i tried to stick it back on, and its been holding pretty good ever since. I may eventually fill in the holes as well as shave the rear wiper once i get my kit...
#11
Super Moderator
at first i debadged only the lexus and the rx300 and proceeded to the L. only after i took it off i noticed that there were holes. haha so i tried to stick it back on, and its been holding pretty good ever since. I may eventually fill in the holes as well as shave the rear wiper once i get my kit...
#12
Driver
Thread Starter
Join Date: Jul 2005
Location: hawaii
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
icic. well being that i live in hawaii, not too much rain. at least not enough for me to want the wiper anyways. it just looks a little off to me, thats all
#13
Super Moderator
You are right, it does seem a little strange with the rear wiper. It would be one big whole to fill...if I get around to it may ask my uncle how he would manage it...though I think he might say too fill it in with a plastic cap and then pour filler over it...thne paint.
#14
Driver
Thread Starter
Join Date: Jul 2005
Location: hawaii
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
yea im actually thinking of plugging it with a piece of color matched plastic for now. it might look a lot better.. hmmm i'll probably start on it sometime this week. i'll post pics if i do end up getting around to it
#15
Sorry dude, been busy this weekend. It's about a 2 inch gap in the back and maybe a 2.5 gap in the front. But then again I'm runnning tires that are a little small. 245/35/20. So the overall diameter is about 1.5 inches smaller. When I get my 245/45/20s the gap should look a little better. Just installed my angel eyes too. Heere ya go: