does anyone know how to bleed clutch with w58 swap
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2014
Location: wa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
does anyone know how to bleed clutch with w58 swap
i been doing for a day didnt know how to make it work
i have ask couple of friend they said just get the bubbles out that will work but i try whole day that see no different
is any one swap w58 before how do u make the thowout bearing works
bought the part from
http://www.xcessivemanufacturing.com/home.html
anyone know please help thanks
i have ask couple of friend they said just get the bubbles out that will work but i try whole day that see no different
is any one swap w58 before how do u make the thowout bearing works
bought the part from
http://www.xcessivemanufacturing.com/home.html
anyone know please help thanks
#2
Driver School Candidate
Join Date: Oct 2013
Location: Tx
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
You cant bleed the clutch if the tranny isnt on.
You bleed it from the slave cylinder on the transmission. There is a valve threaded in it, you loosen and tighten to bleed it.
And those first two pics... i dunno what the hell that goes to bc that does not go anywhere near a w58
You bleed it from the slave cylinder on the transmission. There is a valve threaded in it, you loosen and tighten to bleed it.
And those first two pics... i dunno what the hell that goes to bc that does not go anywhere near a w58
#3
Driver School Candidate
Thread Starter
Join Date: Jan 2014
Location: wa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
You cant bleed the clutch if the tranny isnt on.
You bleed it from the slave cylinder on the transmission. There is a valve threaded in it, you loosen and tighten to bleed it.
And those first two pics... i dunno what the hell that goes to bc that does not go anywhere near a w58
You bleed it from the slave cylinder on the transmission. There is a valve threaded in it, you loosen and tighten to bleed it.
And those first two pics... i dunno what the hell that goes to bc that does not go anywhere near a w58
i been replace the new bearing from the store its not the bearing problem also i go autozone bought another same part is stil the same i dont think thats any part damage all part bought brand new
that s another way to try ?
#5
i had the same problem when i did the w58 1uzfe swap
first things first make sure u have the lines connected right i will give the link to my post
1.open bleeder valve on the line
2.press clutch in
3.close bleeder valve
4.pump the clutch might have to help it up again the first few times
5.make sure the clutch engages and if the car feels weird on gear re do it again took me like 5 time to get it right
first things first make sure u have the lines connected right i will give the link to my post
1.open bleeder valve on the line
2.press clutch in
3.close bleeder valve
4.pump the clutch might have to help it up again the first few times
5.make sure the clutch engages and if the car feels weird on gear re do it again took me like 5 time to get it right
#6
https://www.clublexus.com/forums/sc-...to-swap-8.html
this is what i have done so far not done yet just need to install exhaust and pass smog lol
this is what i have done so far not done yet just need to install exhaust and pass smog lol
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post