Will Aristo exhaust fit on a GS430?
#1
Lead Lap
Thread Starter
Join Date: Nov 2004
Location: Alberta
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
Will Aristo exhaust fit on a GS430?
Just wondering if a JDM Aristo exhaust will fit on my Gs430? I tried seraching nothing came up.
And is the one I'm looking for the Aristo JZS161 version? Sorry I am new to toyota.
And is the one I'm looking for the Aristo JZS161 version? Sorry I am new to toyota.
#2
Lexus Champion
iTrader: (2)
Join Date: Aug 2004
Location: Pennsylvania
Posts: 2,134
Likes: 0
Received 0 Likes
on
0 Posts
i may be completely wrong here so don't hold me to anything... i don't know much about the difference between the us-spec GS and the aristo but if it is just the exhaust, i dont see why it wouldn't fit... but the rear bumper may be slightly different in size between the GS and the aristo so you might want to make sure that the width of the two rears are the same... but otherwise... i think they should fit
#7
Lead Lap
Thread Starter
Join Date: Nov 2004
Location: Alberta
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Burton
Yes you want it for the JZS161 or JZS160 which is the nonturbo version.
Ben
Ben
Trending Topics
#9
Lexus Champion
Originally Posted by Hollywood
Ya I want the turbo version for sure. I have a Fujitsubo Legalis R lined up for 1299.00 CAD 1070 US, shipped. Although I think it's a bit overpriced.
Err...if your car is non-turboed, a 161 exhaust system is the last thing you want. You will in fact lose power if you install a jdm exhaust system meant for the jzs161. My RSR system for example has a full 3.5" straight through pipe from the 1st cat down. If you install this on your car, I can guarantee that you will lose just about all your low end torque.
#10
Lead Lap
Thread Starter
Join Date: Nov 2004
Location: Alberta
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jtanoyo1
Err...if your car is non-turboed, a 161 exhaust system is the last thing you want. You will in fact lose power if you install a jdm exhaust system meant for the jzs161. My RSR system for example has a full 3.5" straight through pipe from the 1st cat down. If you install this on your car, I can guarantee that you will lose just about all your low end torque.
#13
Pit Crew
iTrader: (2)
From what I have found online from other Toms and TRDs for sale, both Toms and TRD use their own mid pipes which is probably why the axleback doesn't work with the factory mids. I had a C-One exhaust before and that bolted up perfectly but they never made anything but axleback for the Aristo.
Thread
Thread Starter
Forum
Replies
Last Post