Electric Radiator Fan Install simplified?
#16
Lexus Champion
iTrader: (18)
Heres another question, i have to use 10 gauge wire for the battery wire to relays, and from each fan to relay correct?
I guess im a little confused on the wire gauge needed. And will 1 fuse be enough or will i need a fuse.for each relay. And what fuse size.
Or can i attach the 10 wire to the 14-16 wire? Even if id the 14 wire is 2 inches long? Will that burn it out,?
Or running a 30amp fuse through 14 gauge wire? But il be using 1 wire to power 2 relays, will that sort of even it out?
Now each fan is 80watt/12 volt, so thats about 6amps? So each only draws 6 amps? Thats wat the calculator said. but a larger amp fuse cause the fans to work harder/spin faster? Or what will more amps to the system make it do?
Sorry for all these questions lol, i wana make sure i do it right
I guess im a little confused on the wire gauge needed. And will 1 fuse be enough or will i need a fuse.for each relay. And what fuse size.
Or can i attach the 10 wire to the 14-16 wire? Even if id the 14 wire is 2 inches long? Will that burn it out,?
Or running a 30amp fuse through 14 gauge wire? But il be using 1 wire to power 2 relays, will that sort of even it out?
Now each fan is 80watt/12 volt, so thats about 6amps? So each only draws 6 amps? Thats wat the calculator said. but a larger amp fuse cause the fans to work harder/spin faster? Or what will more amps to the system make it do?
Sorry for all these questions lol, i wana make sure i do it right
That really is overkill, but its safe. You can use 2 fuses, one from battery to relays and one between your ignition source and relays. That is plenty safe enough. If 8awg wire is over priced, use 10 and 12.
#17
okay this is what I found out by looking at my gs300. The wiring harness is separate from the main harness. The temp switch is on the bottom of the radiator. I remember when I changed the radiator on my 1996 sc300 5 speed radiator that it had that same plug at the bottom , but it was a aftermarket brand. That's where the temp switch would go. my harness has about 3 relays by the fire wall with a wire that goes to the air condition compressor. I did look at the schematics , and its not connected to the ecu at all. I will look a little more into this Saturday if time permits and report back . I will try to take some pics as well.
Thread
Thread Starter
Forum
Replies
Last Post
jq23lexus
LS - 1st and 2nd Gen (1990-2000)
18
11-02-23 09:43 AM