DIY: Installing a Spin Turb Knob
05-17-14, 07:58 AM
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Dallas, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
DIY: Installing a Spin Turb ****
For you guys that are into the drift scene or would just like to have a cool looking E-Brake button this might be just for you.
To remove the stock one you would need to spin it Counter clock wise (facing the back of the car) it should just come right off after couple seconds. The stock spring would not be necessary so that would need to come off too.
Attached Thumbnails
Last edited by DriftSCZ30; 05-17-14 at 08:12 AM .
Reason: I'm a noob
05-17-14, 08:14 AM
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Dallas, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
This is what will be taking it's place, it's originally for an AE86 from Techno Toy Tuning. It will work just fine.
Attached Thumbnails
05-17-14, 08:15 AM
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Dallas, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Once the stock one it's off this is what it will look like.
Attached Thumbnails
05-17-14, 08:18 AM
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Dallas, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Fit the new one right in and spin it Clockwise until it's all nice and tight. This just takes like 2 minutes BTW.
Attached Thumbnails
05-17-14, 08:22 AM
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Dallas, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
This is what my interior looks like, about to drop the Auto trans to begin my 5sp swap
Attached Thumbnails
05-17-14, 08:23 AM
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Dallas, TX
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
05-17-14, 09:22 AM
Lead Lap
Join Date: Oct 2010
Location: NY
Posts: 650
Likes: 0
awesome!!!! this is even easier to do than on an s chassis. I've been wanting to do this for a while thanks
05-20-14, 05:47 AM
Lead Lap
Join Date: Aug 2013
Location: ohio
Posts: 476
Likes: 0
hahaha wow.
its that simple?
Thought there would be more to it than a plastic piece and spring.
05-26-14, 08:32 AM
Moderator
Join Date: Sep 2008
Location: NC
Posts: 3,235
Simple, but easy! I like it, thanks for sharing!
steve
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JACKPAC
IS - 2nd Gen (2006-2013)
13
10-10-11 08:14 AM
rscott22
IS - 2nd Gen (2006-2013)
5
06-04-09 02:54 PM
SCjzz
SC- 1st Gen (1992-2000)
7
09-23-08 08:52 PM
b1ackhawk
Lexus Audio, Video, Security & Electronics
1
05-28-07 11:05 PM
BigghookUp
Lexus Audio, Video, Security & Electronics
3
10-10-02 11:41 PM