(1992)SC400 egr delete resistor location
#1
(1992)SC400 egr delete resistor location
Well first off hello to all
im having a problem locating the sensor im suppose to be putting this resistor in ive searched lextreme,google,and here and no one seems to answer where it goes on a "1992" sc400 i know where it is for the v6s and even the 95 and up v8s but not the 92...
there are three sensors i see one by the diagnostic box(black sensor) and one the exact opposite by the rear intake mani(turqoise sensor) and one behind the intake manifold(grey sensor)
ive tried all 3 with the resistor still throwing the code ive deleted the egr system so im not sure wuts going on ive reset the ecu each time i tried one all i need is some kind of help thanks
im having a problem locating the sensor im suppose to be putting this resistor in ive searched lextreme,google,and here and no one seems to answer where it goes on a "1992" sc400 i know where it is for the v6s and even the 95 and up v8s but not the 92...
there are three sensors i see one by the diagnostic box(black sensor) and one the exact opposite by the rear intake mani(turqoise sensor) and one behind the intake manifold(grey sensor)
ive tried all 3 with the resistor still throwing the code ive deleted the egr system so im not sure wuts going on ive reset the ecu each time i tried one all i need is some kind of help thanks
#2
I have a 96 and i place the resistor in the connector of the egr valve itself, and i still have a CEL. I am also wondering where it goes... I've also had this problem for a while.
#4
Well we all know any SC400 regardless of the year has the 4.0 1uz-fe V8. Thats what makes it a 400. There has never been a V6 SC! Do some more research about you car and your motor man.
#6
Pole Position
iTrader: (1)
Join Date: Mar 2006
Location: Fl
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
I deleted my egr by just removing the valve and blocking off the holes in the side of the intake manifold. I didn't have to use any resisters. and no cel, ok well to be fair no egr related cel, i did have a cel from no secondary o2s that i ignored. 1992 motor btw.
Trending Topics
#8
Pole Position
iTrader: (1)
Join Date: Mar 2006
Location: Fl
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
stock computer, not really the side but you can kinda see.
Heres a good shot of the block off plate.
And heres a current pic, now none of that crap matters, only sensors i have now are crank, iat, water temp, map, and the motor will run with just the cps. now running an electromotive tech-gt ecu.
Heres a good shot of the block off plate.
And heres a current pic, now none of that crap matters, only sensors i have now are crank, iat, water temp, map, and the motor will run with just the cps. now running an electromotive tech-gt ecu.
Thread
Thread Starter
Forum
Replies
Last Post
Crazedshif
Performance & Maintenance
2
10-30-13 12:23 AM