Oil Return Line
06-16-09, 06:04 AM
#1
Oil Return Line
Yes I have searched. The only answer I got was I need to accommodate it.
Facts...
1JZ with a front sump converted into a rear sump. Now the oil return lines do not line/match up.
Question is, how do I get it to line up and can I just by a US Spec oil return line?
Sump conversion is from an 2JZGTE(US Spec). Thanks.
Facts...
1JZ with a front sump converted into a rear sump. Now the oil return lines do not line/match up.
Question is, how do I get it to line up and can I just by a US Spec oil return line?
Sump conversion is from an 2JZGTE(US Spec). Thanks.
06-17-09, 01:43 AM
#2
Rookie
iTrader: (4)
Join Date: Oct 2008
Location: Houston,Tx
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I ran into the same problem when i converted mine. I had to bend the lines that run from the turbos and modify the bracket that is running along the side of the block so that I could connect the hoses. It took me around an hour to do everything and install new hoses. This was probaly the hardest part of the whole swap and a pain in the a$@.
Thread
Thread Starter
Forum
Replies
Last Post
SuprRunner
GS - 1st Gen (1993-1997)
6
11-10-05 08:08 AM
