Help diagnose error codes '95 SC400
#1
Driver School Candidate
Thread Starter
Help diagnose error codes '95 SC400
Can anyone help with error code diagnosis on my '95 SC400? My main problem is that TRAC lights intermittently when driving (sanely). I'm not sure ABS works either, but that is a side issue.
My diagnostic port is under the dash. I jumper E1 and TC to get:
TRAC code 43
ABS code 54
airbag and cruise flash continuously
Searching this forum, there seem to be different diagnostic procedures depending on model year and perhaps engine size. I read that the diagnostic port is either on the intake manifold (I don't see it) or under the dash (got it). I also read that E1 is to be jumpered with TE1 or TE2 or TC. The first two yield no codes, and only light the CEL and something else (cruise?) continuously. And I can't find mention of these specific codes.
My diagnostic port is under the dash. I jumper E1 and TC to get:
TRAC code 43
ABS code 54
airbag and cruise flash continuously
Searching this forum, there seem to be different diagnostic procedures depending on model year and perhaps engine size. I read that the diagnostic port is either on the intake manifold (I don't see it) or under the dash (got it). I also read that E1 is to be jumpered with TE1 or TE2 or TC. The first two yield no codes, and only light the CEL and something else (cruise?) continuously. And I can't find mention of these specific codes.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Neil4Speed
Performance & Maintenance
5
06-23-12 10:30 AM
2cars4Trbo
Performance & Maintenance
4
10-21-11 09:11 AM
CallmeQ
GS - 1st Gen (1993-1997)
2
09-26-09 12:19 PM