Climate Control Doesnt work after Aristo Swap
#1
Driver
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: nc
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Climate Control Doesnt work after Aristo Swap
My swap is done, I had phoenix tuning do the harness. everything runs awesome, but the climate control doesnt work. I asked dr tweak and he says the climate control has nothing 2 do with the engine harness. im not sure. i checked all fuses and they are good. the climate control worked fine before the swap. Any ideas or any climate control wiring diagrams?
#5
Lexus Test Driver
Join Date: Aug 2003
Location: California
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
You are not the first, had the same problem as you, as discussed here: 1jz to sc300 AC fix
My AC ecu was left unpowered, it was just one wire not connected. Once found and soursed to power everything was normal.
My AC ecu was left unpowered, it was just one wire not connected. Once found and soursed to power everything was normal.
#6
Lexus Test Driver
iTrader: (2)
You are not the first, had the same problem as you, as discussed here: 1jz to sc300 AC fix
My AC ecu was left unpowered, it was just one wire not connected. Once found and soursed to power everything was normal.
My AC ecu was left unpowered, it was just one wire not connected. Once found and soursed to power everything was normal.
#7
Lexus Test Driver
Join Date: Aug 2003
Location: California
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
The wiring for my swap was done at the shop, where is exactly where I took it back for the fix. I know what was was done but not the location of the climate control ecu and can be of no help on that. High odds that the issue lies in that ecu being unpowered.
Thread
Thread Starter
Forum
Replies
Last Post
Davidddd
SC- 1st Gen (1992-2000)
3
08-25-13 07:18 PM
booja
Performance & Maintenance
3
12-23-08 08:32 AM