throttle body compatiblity issue?
#1
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
throttle body compatiblity issue?
Anyone know if the odb2 (1997) SC300 throttle body
will work on a odb1 car??
They look the same (almost; the brackets for the semi wheel that the gas pedal cable attaches to is a bit different, but functions the same)
same number of hoses going in/out
Thanks
will work on a odb1 car??
They look the same (almost; the brackets for the semi wheel that the gas pedal cable attaches to is a bit different, but functions the same)
same number of hoses going in/out
Thanks
Last edited by dumdumgreg; 11-28-07 at 11:25 PM. Reason: specified year of part
#2
I am not sure. The obd1 throttle body is for 92-95. I am not sure if the obd2 would work on an obd1 car. Sorry I can't give any more help.
Last edited by Lexus082; 11-28-07 at 09:08 PM.
#3
Lexus Test Driver
Thread Starter
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
normally I wouldn't figure they are the same, but visually comparing both side by side, it looks the same
same Idle Air Control motor, TPS, wires, hoses, etc....
(only thing that I would guess, is maybe the IAC or TPS repsond to different voltage signals from a odb2 ecu? )
I think I'm gonna try it, I'll update the post when I do
(unless someone posts with a definite answer that they are not)
thanks
same Idle Air Control motor, TPS, wires, hoses, etc....
(only thing that I would guess, is maybe the IAC or TPS repsond to different voltage signals from a odb2 ecu? )
I think I'm gonna try it, I'll update the post when I do
(unless someone posts with a definite answer that they are not)
thanks
#7
normally I wouldn't figure they are the same, but visually comparing both side by side, it looks the same
same Idle Air Control motor, TPS, wires, hoses, etc....
(only thing that I would guess, is maybe the IAC or TPS repsond to different voltage signals from a odb2 ecu? )
I think I'm gonna try it, I'll update the post when I do
(unless someone posts with a definite answer that they are not)
thanks
same Idle Air Control motor, TPS, wires, hoses, etc....
(only thing that I would guess, is maybe the IAC or TPS repsond to different voltage signals from a odb2 ecu? )
I think I'm gonna try it, I'll update the post when I do
(unless someone posts with a definite answer that they are not)
thanks
Thread
Thread Starter
Forum
Replies
Last Post