1,006rwhp SC300
#1
Lead Lap
Thread Starter
1,006rwhp SC300
Figured we'd throw it on the dyno, even in the heat to see if we could hit the 1khp mark. Well, I'm glad we did!!! We're still having some little issues, like the boost controller not holding boost past 35-36psi, and I managed to get a new toyo water pump that doesn't have the front hub pressed on all the way, so it doesn't line up 100% with the other pulley's. After 8k rpms it nearly threw the belt off everytime!
I'm going to fix the waterpump, and we're going to try another boost controller/ or solenoid and redyno. If you look at the graph you'll see some tire spin, but it starts to fall off as boost falls. I see over 1100rwhp on this setup with holding 40+psi. I'm pretty happy with the torque numbers on boost as well.
http://videos.streetfire.net/video/a...0c01278dc2.htm
Chris
I'm going to fix the waterpump, and we're going to try another boost controller/ or solenoid and redyno. If you look at the graph you'll see some tire spin, but it starts to fall off as boost falls. I see over 1100rwhp on this setup with holding 40+psi. I'm pretty happy with the torque numbers on boost as well.
http://videos.streetfire.net/video/a...0c01278dc2.htm
Chris
Last edited by quikturbo; 07-28-06 at 02:59 PM.
Trending Topics
#9
Those are some beautiful curves. Over 800lbs of torque! You'll be flying on the freeway with easy. Just make sure you have some solid stablizers so you don't go crashing back down to earth.
#11
Lexus Champion
Originally Posted by southernsc
Congrats!!! is this a first ever for a SC to hit the 4 digit mark on the dyno??
simply amazing Chris. when are you hitting the track?