O2 sensor wiring to ECU - pls need help
#1
Driver School Candidate
Thread Starter
Join Date: May 2014
Location: NEWYORK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
O2 sensor wiring to ECU - pls need help
[SIZE="4"]need to know the O2 sensor cable port in ECU , to connect O2 sensor direct cable to ECU or any diagram for ECU showing the port number. ... like image below
(example )
my car 1997 ECU
waiting your help
(example )
my car 1997 ECU
waiting your help
Last edited by RA40; 05-11-14 at 09:39 PM. Reason: descriptive title
#3
Moderator
These are for 94-97 JDM UCF20/21. Probably the same with USM.
#5
Driver School Candidate
Thread Starter
Join Date: May 2014
Location: NEWYORK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
thank you YAMAE appreciate your help
i will tray to connect sensor it has 4 wire (blue,black , black and white)
which one it is going to (ECU) ( ground -12 ) (battery +12) and the fourth one .
like below image
i m trying to follow this image
i will tray to connect sensor it has 4 wire (blue,black , black and white)
which one it is going to (ECU) ( ground -12 ) (battery +12) and the fourth one .
like below image
i m trying to follow this image
#6
Moderator
You are welcome.
Ground side wires are all connected to pin 16 of connector B, signal name E1
Ground side wires are all connected to pin 16 of connector B, signal name E1
Thread
Thread Starter
Forum
Replies
Last Post
dubseven
Performance & Maintenance
4
04-09-15 10:47 AM
sirgabo
LS - 1st and 2nd Gen (1990-2000)
2
01-30-14 08:33 AM