will i need fender work?
#1
Driver
Thread Starter
Join Date: Nov 2009
Location: Southern California
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
will i need fender work?
i decided to go along and get a fixed setup on my 2000 ls400. i have df210s and kyb gr2s waiting to be installed. but prior to taking it to a shop. i was wondering if i had to get any fender work done? im running 245/40/19 on 19x8.5 with 34 offset on all four corners. i dont want to spend the extra money if i dont have to. any input?
#2
I am running 19x8.5 too but 245/35s and +38 at the moment and dont need any roll/pull and mine is a ucf10. I heard ucf20 has more clearance... so im assuming youre fine with those sizes. But then again... I am not lowered yet... waiting for coils to come in >_<
#3
Driver
Thread Starter
Join Date: Nov 2009
Location: Southern California
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
yeah im kinda suspecting that i wont need any fender work. i just wanted to be sure before i take my car an hour away from my residence to get the springs and struts installed. then end up finding out that it rubs or something.
#5
Lexus Test Driver
iTrader: (1)
I've been wondering about this also since i have 19x 8.5 waiting in the wings to get put in sometime soon. +33 all around, I'm planning on getting 15 or 20mm spacers to make them fit flush. I thought I read in another thread that PureDrifter mentioned a slight roll in the front for those offsets.
#8
Driver
Thread Starter
Join Date: Nov 2009
Location: Southern California
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
awesome! thanks puredrifter. i searched and searched but i kept on getting mixed reviews on whether i needed to or not. guess ill be taking it to tony the fender rolling guy soon.
Thread
Thread Starter
Forum
Replies
Last Post