Too aggressive for a UCF20?
#1
Too aggressive for a UCF20?
https://www.clublexus.com/forums/whe...s-vouched.html
i should be able to make those fit with a little camber and a small roll, no?
Would 21s work on a 2LS though or is that too big?
i should be able to make those fit with a little camber and a small roll, no?
Would 21s work on a 2LS though or is that too big?
#2
Super Moderator
iTrader: (6)
The size is ok but the offset is to aggressive. If you want to go to that level to fit them, it is possible. Seeing them at parking lot slammed height is cool but for driving, the flushed fitment is more comical looking with that much poke.
And watch the comments posted, at 10 bumps, it get's closed.
And watch the comments posted, at 10 bumps, it get's closed.
#5
I'm not worried about the tire size, more the widths and offsets of the wheels themselves.
Not looking for crazy Bippu gangster camber or monster poke, so anything more than a healthy roll, mild pull with ~ -3° to -4° camber rear and 1° less up front is what I'm after. I've run similar camber on previous cars with no issues, so I'm not worried in the respect; and I've been rolling fenders for going on a decade, just haven't had time to really dive in and take a lot of measurements on this car yet.
Also I'm happy with my wheels I have, just like these a lot more and if he's keen on a trade, I'd pull the trigger!
Not looking for crazy Bippu gangster camber or monster poke, so anything more than a healthy roll, mild pull with ~ -3° to -4° camber rear and 1° less up front is what I'm after. I've run similar camber on previous cars with no issues, so I'm not worried in the respect; and I've been rolling fenders for going on a decade, just haven't had time to really dive in and take a lot of measurements on this car yet.
Also I'm happy with my wheels I have, just like these a lot more and if he's keen on a trade, I'd pull the trigger!
#6
Those are nice numbers!! I would get them. Im 18x10/11 +8 and this is how it looks im sure youll be fine. Just make sure you dump it after!
Note that i have pulled fenders but that because im +8 and my camber almost maxed.
Note that i have pulled fenders but that because im +8 and my camber almost maxed.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jesse gs30
Suspension
7
04-27-14 12:04 PM
nismo4life
LS - 1st and 2nd Gen (1990-2000)
18
05-27-13 09:27 AM