i am going to replace my engine and trans mounts. i found a kit on ebay that replaces the 2 engine and 1 trans mount that was recommended on lextreme. how do i do it? do i put the car on jack stands and then jack up the engine? i heard it wasn't that hard. i know someone here knows how to do it. thanks

 

basically thats what u do. be careful when jacking up the engine though. ive heard a piece of 2x4 between the jack and the oilpan works.

 

first take the heater control valve off.... or you will break it, we did and knew to watch out for it.
https://www.clublexus.com/forums/ls4...placement.html

and we used this as a guide also.

 

thanks as always guys

 

billy, where is the heater control valve? thanks

 

Should be mounted on the rear engine bulkhead/firewall almost in the centre at the top may be covered by a black plastic casing which just unclips, you will then see the pipes attached to it.

 

Here is mine:

 

awesome, thanks

 

thaks guys ... great sheizze