Ball joints replaced
#1
Driver
Thread Starter
Join Date: Jul 2003
Location: Florida
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Ball joints replaced
Changed the ball joints on my 95 LS. I had a noise that sounded like it was coming thru the floor and was advised by members on here to replace the balljoints. Well I did and all is fine...no more noise...smooth over bumps.
Thanks guys.
Thanks guys.
#4
Max - I had pretty terrible inner tire wear when my lowers were bad. Pretty embarassed that I never noticed it ahead of time! Since I replaced the lowers and my front tires last November everything is fixed - no clunks and no abnormal tire wear. Did you see and tire wear bro?
Also I still have OEM upper CA's after 179,000 miles Alignment and wear patterns are all normal - no vibration, thumps, etc.
Also I still have OEM upper CA's after 179,000 miles Alignment and wear patterns are all normal - no vibration, thumps, etc.
#5
Driver
Thread Starter
Join Date: Jul 2003
Location: Florida
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Max - I had pretty terrible inner tire wear when my lowers were bad. Pretty embarassed that I never noticed it ahead of time! Since I replaced the lowers and my front tires last November everything is fixed - no clunks and no abnormal tire wear. Did you see and tire wear bro?
Also I still have OEM upper CA's after 179,000 miles Alignment and wear patterns are all normal - no vibration, thumps, etc.
Also I still have OEM upper CA's after 179,000 miles Alignment and wear patterns are all normal - no vibration, thumps, etc.
I can't say I noticed abnormal wear on the tires. The problem I was having is a lot of noise when going over imperfections in the road.
I plan on replacing the control arms and struts end of summer.
#6
Interesting. I was getting the thump going over bumps - turned out to NOT be the strut bar but the lowers. My right side lower was the worst.
I would like to change my uppers as well - I will do it myself as it is not hard. Too bad Daizen doesn't make upgraded uppers. I bet they are stiffer and provide a better ride than OEM.
I would like to change my uppers as well - I will do it myself as it is not hard. Too bad Daizen doesn't make upgraded uppers. I bet they are stiffer and provide a better ride than OEM.
#7
Do they make lowers for a 99? I have clunking and some suspension noises, esp from the front right of the car, and I'm not exactly sure if it's the ball joints, sway bar bushings, control arm bushings, or what. Either way, I'd like to go with aftermarket upgraded parts if there is something better than OEM available without any disadvantages.
Trending Topics
#9
Do they make lowers for a 99? I have clunking and some suspension noises, esp from the front right of the car, and I'm not exactly sure if it's the ball joints, sway bar bushings, control arm bushings, or what. Either way, I'd like to go with aftermarket upgraded parts if there is something better than OEM available without any disadvantages.
Thread
Thread Starter
Forum
Replies
Last Post
Max Power
LS - 1st and 2nd Gen (1990-2000)
2
09-03-10 05:26 PM