Data system lowering module help
#1
Pit Crew
Thread Starter
Data system lowering module help
I have just installed my data system lowering module.
I bought a used one and it appears to be lowering and raising the car.
It does not seem like all 4 corners are even. I don't have the instructions on how to reset or play with the settings. If you have them and willing to share, please email me - amack4@me.com.
Thanks for your help on this and many other issues you all have posted about
I bought a used one and it appears to be lowering and raising the car.
It does not seem like all 4 corners are even. I don't have the instructions on how to reset or play with the settings. If you have them and willing to share, please email me - amack4@me.com.
Thanks for your help on this and many other issues you all have posted about
#2
this is all covered in another thread.
To reset do this:
With the ignition off, press and hold the Mode button while you switch the ignition on.
For the instructions look here. Sorry, all data system manuals are in Japanese. If I get the time I will try and translate a few of them.
680
http://www.datasystem.co.jp/support/...asc680_ope.pdf
680L
http://www.datasystem.co.jp/support/...sc680l_ope.pdf
Or go to the Club Lexus thread that explains this all in english.
https://www.clublexus.com/forums/ls-...fo-thread.html
If you have questions, I would ask them in this thread instead of starting a new thread for each individual issue.
To reset do this:
With the ignition off, press and hold the Mode button while you switch the ignition on.
For the instructions look here. Sorry, all data system manuals are in Japanese. If I get the time I will try and translate a few of them.
680
http://www.datasystem.co.jp/support/...asc680_ope.pdf
680L
http://www.datasystem.co.jp/support/...sc680l_ope.pdf
Or go to the Club Lexus thread that explains this all in english.
https://www.clublexus.com/forums/ls-...fo-thread.html
If you have questions, I would ask them in this thread instead of starting a new thread for each individual issue.
#4
Instructor
Yes, it best to go thru the instructions and get it right. I know although it shows its even, my front right sits a bit lower than the right. I corrected that with the module and now theyre both even. The rear is worked together so no adjusting left and right on the rear.
#5
Pit Crew
Thread Starter
this is all covered in another thread.
To reset do this:
With the ignition off, press and hold the Mode button while you switch the ignition on.
For the instructions look here. Sorry, all data system manuals are in Japanese. If I get the time I will try and translate a few of them.
680
http://www.datasystem.co.jp/support/...asc680_ope.pdf
680L
http://www.datasystem.co.jp/support/...sc680l_ope.pdf
Or go to the Club Lexus thread that explains this all in english.
https://www.clublexus.com/forums/ls-...fo-thread.html
If you have questions, I would ask them in this thread instead of starting a new thread for each individual issue.
To reset do this:
With the ignition off, press and hold the Mode button while you switch the ignition on.
For the instructions look here. Sorry, all data system manuals are in Japanese. If I get the time I will try and translate a few of them.
680
http://www.datasystem.co.jp/support/...asc680_ope.pdf
680L
http://www.datasystem.co.jp/support/...sc680l_ope.pdf
Or go to the Club Lexus thread that explains this all in english.
https://www.clublexus.com/forums/ls-...fo-thread.html
If you have questions, I would ask them in this thread instead of starting a new thread for each individual issue.
I wasn't able to get those instructions to work for me for some reason. I also don't have the icons on the left side of the module. No TEMS or bell.
I'll give it another shot though.
Thanks for your help and the Japanese instructions. At least I have some pics to look at. Lol
#6
Instructor
AMACK, I lost all my contact info but hit me up when you have a chance so I can lock you in again. Maybe we can get together shortly after the 1st and try and figure it out. At least you'll have something to compare side by side with mines there.
#7
No TEMS? If you have factory Lexus air suspension, then you should have TEMS... Maybe Im wrong.
So heres the deal, Im not exactly fluent in Japanese. There is 27 pages and a lot of information on each. Im not going to be able to do this whole thing anytime soon. Here is the first page. If you have an idea of what page you need next let me know. Or just have fun looking at all the pics.
Last edited by IncgntoLex; 12-30-15 at 01:55 PM. Reason: Insert translated photo of manual
Trending Topics
#8
Pit Crew
Thread Starter
No TEMS? If you have factory Lexus air suspension, then you should have TEMS... Maybe Im wrong.
So heres the deal, Im not exactly fluent in Japanese. There is 27 pages and a lot of information on each. Im not going to be able to do this whole thing anytime soon. Here is the first page. If you have an idea of what page you need next let me know. Or just have fun looking at all the pics.
So heres the deal, Im not exactly fluent in Japanese. There is 27 pages and a lot of information on each. Im not going to be able to do this whole thing anytime soon. Here is the first page. If you have an idea of what page you need next let me know. Or just have fun looking at all the pics.
That's awesome. Thanks for doing this.
I'm not sure what the next pages should be.
I kinda what to reset everything and start over clean.
In case I didn't explain it right. I don't have the TEMS settings on the module. They don't show up anywhere. Per the instructions from the forumn instructions for he unit.
#10
Pit Crew
Thread Starter
#13
Advanced
iTrader: (1)
That's awesome. Thanks for doing this.
I'm not sure what the next pages should be.
I kinda what to reset everything and start over clean.
In case I didn't explain it right. I don't have the TEMS settings on the module. They don't show up anywhere. Per the instructions from the forumn instructions for he unit.
I'm not sure what the next pages should be.
I kinda what to reset everything and start over clean.
In case I didn't explain it right. I don't have the TEMS settings on the module. They don't show up anywhere. Per the instructions from the forumn instructions for he unit.
#14
Advanced
iTrader: (1)
That's awesome. Thanks for doing this.
I'm not sure what the next pages should be.
I kinda what to reset everything and start over clean.
In case I didn't explain it right. I don't have the TEMS settings on the module. They don't show up anywhere. Per the instructions from the forumn instructions for he unit.
I'm not sure what the next pages should be.
I kinda what to reset everything and start over clean.
In case I didn't explain it right. I don't have the TEMS settings on the module. They don't show up anywhere. Per the instructions from the forumn instructions for he unit.
Thread
Thread Starter
Forum
Replies
Last Post
FoxCars
LS - 4th Gen (2007-2017)
11
12-30-20 05:15 PM
KINGPING
GS - 3rd Gen (2006-2011)
6
11-24-06 07:27 PM
someone_in
Lexus Audio, Video, Security & Electronics
1
10-13-05 04:42 PM