Plugging a radar detector into the wire harness of the auto dimming mirror - Club Lexus Forums

Log In 

Plugging a radar detector into the wire harness of the auto dimming mirror

Reply
 
 
 
Thread Tools Search this Thread
Old 07-11-10, 12:04 AM   #1
LS2k
Pole Position
Thread Starter
 
Join Date: Nov 2008
Location: CA
Posts: 233
Default Plugging a radar detector into the wire harness of the auto dimming mirror

I would like to add a radar detector to the passenger visor and would need to connect the wire to the mirror harness like in the pic at the bottom of this page

Has anyone done some similar before? how easy it is to access the wire harness of the mirror?
LS2k is offline   Reply With Quote
Old 07-11-10, 07:11 AM   #2
WhitBaby
Lead Lap
 
WhitBaby's Avatar
 
Join Date: Feb 2002
Location: Golden, CO
Posts: 445
Default

Quote:
Originally Posted by LS2k View Post
I would like to add a radar detector to the passenger visor and would need to connect the wire to the mirror harness like in the pic at the bottom of this page

Has anyone done some similar before? how easy it is to access the wire harness of the mirror?

Wiring is accessed by lowering the overhead glasses case, removing the two Phillips screws behind the two pop-out trap doors then do some subtle prying, it pops right out then exposing the wiring, circuit board, etc.

I understand some have tied into the large black wire for positive and the ground bracket for negative source. Might wanna confirm this with a voltmeter as I haven't actually done this myself. Dunno if it's a switched source or not.
Makes for a nice short run to 'detector.


Whit
WhitBaby is offline   Reply With Quote
Old 07-11-10, 07:25 AM   #3
TJW98LS
Lexus Champion
iTrader: (1)
 
TJW98LS's Avatar
 
Join Date: Mar 2005
Location: Kentucky
Posts: 3,584
Default

Only problem with that is... you lose the mute function on your X50.

I have mine located in the top left hand side of the car strictly for radar (No need to set it low for Laser since laser is immediate). Because its up there, I stretched out my wire and ran it down the pillar, under the dash, and around the right side of the foot well up into the cigarette lighter. This way the wire is gone from view, and I still retain my mute function.
TJW98LS is offline   Reply With Quote
Old 07-11-10, 01:05 PM   #4
LS2k
Pole Position
Thread Starter
 
Join Date: Nov 2008
Location: CA
Posts: 233
Default

Thank you Whit and TJW98LS for the info, so maybe i should use a smartcord to resolve the mute issue.

Any recommendation for a good installer in the SF bay area?
LS2k is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Hardwiring radar detector onto Rearview mirror RXcruiser RX - 3rd Gen (2010-2015) 11 09-11-15 06:40 AM
Hardwiring a radar detector to rearview mirror. flexnix GS - 4th Gen (2013-present) 2 12-01-14 09:31 PM
Radar detector mount / Blendmount Ironman50 GS - 3rd Gen (2006-2011) 5 01-31-13 09:07 AM
radar detector wiring marony99 IS F (2008-2014) 7 03-11-09 04:10 AM
Hardwire radar detector to the rear view mirror clickart RX - 2nd Gen (2004-2009) 3 12-20-08 07:27 AM


Tags
2011, auto, bmw, connect, detector, detectors, diming, dimming, harness, lexus, ls430, mirror, parrot, plug, pugging, radar, wire

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 07:11 AM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved