Malone68

Hello everybody,

I am new to this forum and I could use some help. After researching this forum, I decided to pull the trigger on a set of 19" LEXUS RC350 F wheels. What I will need to do to make these work on my 2006 IS350?

Here are the specs:

19×9.0 offset 50

19×10 offset 41

From what I have gathered from you guys, I need to adjust the offset on the front wheels to 38 with a spacers ( I was going to get ICHIBA V2 15MM WHEEL SPACERS ) Will the back wheels work as is?

I also need to wrap them in some tires. I was planning on using Front: 255/35-19
Rear: 275/35-19

Any suggestions or help would be greatly appreciated Thanks!.

smokyis350

iTrader: (21)

Most common size would be 235/35/19 and 275/30/19

Malone68

Thank you for your response. Do you think the fenders will need to be rolled? Any advice on whether the offset will work for the front and the back?

smokyis350

iTrader: (21)

You won't need to roll your fenders. The front might rub depending on how low you are. Best bet is to get 225/35/19. I ran 235/35/19 on 19x8.5 +38 offset and only rubbed on big dips. 225/35/19 didn't rub at all.

Malone68

Thanks for the advice. That's definitely the way I'll go then. Should the rears be fine with the 19 x 10 with +41?
Smoky, You are appreciated my man.

smokyis350

iTrader: (21)

Yes. Rear will have no rubbing at all.

Malone68

Could someone help me move this post to the proper thread? I obviously do not know what hell I am doing.

VTsuckah

iTrader: (1)

LOL Most of us really don't, but act as if we do.