Bolt broken in rear AFS sensor...
#1
Driver
Thread Starter
Bolt broken in rear AFS sensor...
I recently lowered my car and got the AFS error so we went back under and tried to adjust it.
There is a bolt that goes straight through the sensor that we tried to loosen. I was loosening the nut and it literally twisted off with part of the bolt. So now 3/4 of the bolt is still there but now I had to completely remove the brackets so it's just not dangling there.
Is that long bolt that goes through the sensor replaceable? Or do I need to get an entirely new sensor? (God, I hope not).
Heres what I'm talking about: Ignore the red arrows as its from a previous thread but there is a long bolt that goes through it. You can see the tip at the top of the black bracket.. thats the tip that twisted off with the nut.
There is a bolt that goes straight through the sensor that we tried to loosen. I was loosening the nut and it literally twisted off with part of the bolt. So now 3/4 of the bolt is still there but now I had to completely remove the brackets so it's just not dangling there.
Is that long bolt that goes through the sensor replaceable? Or do I need to get an entirely new sensor? (God, I hope not).
Heres what I'm talking about: Ignore the red arrows as its from a previous thread but there is a long bolt that goes through it. You can see the tip at the top of the black bracket.. thats the tip that twisted off with the nut.
#2
Driver
Thread Starter
I found the parts on Sewell, but is the bolt part # the correct one?
http://is.sewellparts.com/oem-catalo...S250-2011.html
Part # 91554A0612
http://is.sewellparts.com/oem-catalo...S250-2011.html
Part # 91554A0612
Thread
Thread Starter
Forum
Replies
Last Post
CyFan4036
ES - 1st to 4th Gen (1990-2006)
3
05-17-19 07:41 PM