is200 alternator fuse
11-08-13, 12:38 AM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2013
Location: victoria
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
is200 alternator fuse
Hi Guys
I am hoping someone might have some ideas on why my is200 won't start after i replaced the 120amp alternator fuse after i clumsely blew it trying a jump start. I noticed after i re-connected the battery terminals there was no noise from the solenoid and the horn didn't start sounding as it has before when the terminals were re-connected,also the radio isn't working and there is nothing from the ignition.I was thinking maybe the immobiliser has been activated but would be grateful any ideas...cheers
I am hoping someone might have some ideas on why my is200 won't start after i replaced the 120amp alternator fuse after i clumsely blew it trying a jump start. I noticed after i re-connected the battery terminals there was no noise from the solenoid and the horn didn't start sounding as it has before when the terminals were re-connected,also the radio isn't working and there is nothing from the ignition.I was thinking maybe the immobiliser has been activated but would be grateful any ideas...cheers
01-30-22, 02:26 PM
#2
Driver School Candidate
Join Date: Jan 2022
Location: dublin
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Blown alternator fuse and starter relay.
I recently crossed polarity in my is200 and tried to start it.The 2 hazzard lights stayed on constant didnt blink then it blew the main fuse and starter relay now it turns over but wont start. Did i blow an ecu? Any ideas what i should do next. Help would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post