Has anyone done this?
#5
Lead Lap
iTrader: (1)
Hmmm...my car didn't come with a PRNDL. It only has a 12345NR, but I did replace the **** and boot.
If the chrome ring on autos comes off, it should be pretty easy to put a shifter boot on there. If you need something to hold it in place up top, a plastic bottle cap(s) could work. After gluing the boot to the ring, use small binder clips to secure it until the glue dries.
If you have an extra spot under the radio, or by the coin holders, you can relocate the PWR/Snow switch.
If the chrome ring on autos comes off, it should be pretty easy to put a shifter boot on there. If you need something to hold it in place up top, a plastic bottle cap(s) could work. After gluing the boot to the ring, use small binder clips to secure it until the glue dries.
If you have an extra spot under the radio, or by the coin holders, you can relocate the PWR/Snow switch.
Last edited by rvalero; 09-18-12 at 11:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
gtsfire
SC- 1st Gen (1992-2000)
5
10-25-12 02:10 PM
Scweet14
Performance & Maintenance
14
01-15-12 09:32 PM