wheel/ tire question.
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
wheel/ tire question.
Ok. I am new to the IS300 but have been building cars for about 10 years. I have heard wide tires in the rear can take some work. My question is what would it take to get a 285 (or larger) out back and 235 (or larger) up front either on a 17 or 18 (ie. offset, rolling, cutting ect). I am open to about anything including flares. I plan on lowering the car about 1.5" all around. This is a GTE project with a hp goal of 750-800 whp (so traction is going to be an issue). thanks for your help in advance.
#4
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I will be running a slick at the track i am just looking for a wheel and tire combo that will keep the car somewhat street-able. This project will not be starting for a few months as we are campaigning a supra in NSCRA's True Street and IFO Forced Induction Pro this season. I am just doing some research. Some of you may know my teammate Matt. You can follow our drag racing antics on FB (facebook.com/1320motorsports). I hope i am not breaking any rules by posting that. We are not a shop. Just 2 guys with a garage. =)
Thread
Thread Starter
Forum
Replies
Last Post