Painting calipers
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2014
Location: Dallas, TX
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Painting calipers
Have many of you guys done this? I really want to match the trim in my car. It's black exterior with orange interior accents. Currently I have stock black calipers.
I've seen a lot of various pics but I'm afraid of it looking DIY, so I'm considering trying to find someone to do it professionally.
I've seen a lot of various pics but I'm afraid of it looking DIY, so I'm considering trying to find someone to do it professionally.
#3
Driver School Candidate
Thread Starter
Join Date: Jun 2014
Location: Dallas, TX
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
That looks sweet. . Did you use the H2 orange system? Curious if you have orange trim like me and if it matches pretty close?
Also, did you paint it with calipers on or off?
Also, did you paint it with calipers on or off?
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Jun 2014
Location: Dallas, TX
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I'm just curious on what the wallet damage would look like if they were powder coated and rebuilt.
I guess I could call a body shop to see what they would charge. I don't know that I want to go to that length though and kill the warranty on the brake system. I just got a free brake job (pads, reworking, etc) because of a TSB since they were squealing a bit.
I think if I just paint them (or have them painted), I'd be OK on the warranty piece.
hot damn.. that's the pic I saw that got me thinking of doing it!!
#9
Instructor
iTrader: (6)
I'm not sure if you understand how powdercoating brake calipers works:
The rubber dust boots (some refer to them as seals--you might be) are removed prior to powdercoating. The pistons, dust boots, and bleeder all stay out of the oven.
Make sure your powdercoater does not get paint into any threads or into the piston enclosures.
The rubber dust boots (some refer to them as seals--you might be) are removed prior to powdercoating. The pistons, dust boots, and bleeder all stay out of the oven.
Make sure your powdercoater does not get paint into any threads or into the piston enclosures.
#10
This is the exact color I've been wanting for months now! Just haven't taken the leap to commit to not having my car for two days...plus, I don't really know any reputable shops that specialize in painting calipers in LA as I just moved here.
#12
Lexus Test Driver
Easy to do I did mine in about 5 hours
I left my calipers on cleaned them really good taped and plastic everything off nicely. Purchased my paint through automotivetouchup.com they have every car color imaginable and in an aerosol can that sprays awesome. I took some 400 grit sand paper roughed up the calipers. Sprayed about 6-8 light coats of paint on letting dry for about 5 minutes between each coat (it was a warm day) then applied the Brembo sticker I got online and then did about 6-8 coats of there high gloss clear coat. Came out great and was an easy DIY.
I left my calipers on cleaned them really good taped and plastic everything off nicely. Purchased my paint through automotivetouchup.com they have every car color imaginable and in an aerosol can that sprays awesome. I took some 400 grit sand paper roughed up the calipers. Sprayed about 6-8 light coats of paint on letting dry for about 5 minutes between each coat (it was a warm day) then applied the Brembo sticker I got online and then did about 6-8 coats of there high gloss clear coat. Came out great and was an easy DIY.
#13
Lead Lap
iTrader: (4)
I did mine while doing a full brake job (replaced pads and rotors and full flush) and actually painted them off the car.
My process was pretty much the same except I placed the decals AFTER spraying all layers of the clear. That way the decals can be replaced down the road incase I wanted to change it for whatever reason without having to strip off the paint. After a few months the calipers still look great and the decals are still glossy and intact. I did mine in VHT burnt copper.
My process was pretty much the same except I placed the decals AFTER spraying all layers of the clear. That way the decals can be replaced down the road incase I wanted to change it for whatever reason without having to strip off the paint. After a few months the calipers still look great and the decals are still glossy and intact. I did mine in VHT burnt copper.