Guedzou

UP.

Just need to know if I'll need to use a roller fender with a square setup in 19x10 ET38 / 255 front and 265 rear.

Thank you

nicklausw

It totally depends on ride height and the shape of the sidewall to run a 255/35/19 19x10 +38 up front. As long are you aren't slammed and don't run something like a R888 then you should be fine. In the rear you will need a roll if you putting a 265/35 on albeit just a moderate roll. It will not need to be pancake flat. I started with cheap Nankangs and they easily fit. When I went to Conti DWs I needed to do a little more work with the quarter panels.

Conti DW
19x10 +38 square
255/35
265/35

Guedzou

Thank you Nicklausw!

For the moment, my car is not lowered. I plan to put FALKEN FK453. There will be no rear passengers and for the track days, i will put my stock wheels.

Guedzou

Hello, just to check before buying the LC818 in 19x10 ET38 at the 4 corners, I measured the distance between the outside of the rim and the outside of the fender: here are the photos to compare with the "tire rim calculator".

Front wheel:




Rear wheel :




It's clear that the rims will come out of the fenders. In your opinion it's still good even with the rear fenders rolled?

SlowXIsf

Im running linea corse lemans 19x10 +38 front and rear, tires are 275/30/19 all around too. Lowered on bc coilovers w/ swift springs 18k16k and natural camber. No rub!
Note: rear fenders are shaved down.

Guedzou

Hi,

I just installed my new LINEA CORSE LC818 19x10 ET38 all around with FALKEN FK510 (255 front / 265 rear). What is your opinion on the fitment? I will have to roll the rear fender because I have rubbing issues.