First Track Day Ever- Have some questions
#1
Lead Lap
Thread Starter
First Track Day Ever- Have some questions
I am thinking about doing a track day at AMP in August and have some questions.
Right now I think my car has stock brake pads and I am thinking about switching them for the track day since they are really worn out. I was thinking about getting stoptech pads since they produce less dust than the stock pads and are good for a DD. I am also thinking about changing the fluid. Any suggestions for the brake pads the fluid?
I am currently running 18x9 +35 wheels all around with RS3 V2's 265/40/18 on the back and goodgear eagle all season UHP 255/45/18 on the front. Any suggestions for the alignment? I am thinking about getting the matching RS3's for the front but I haven't decided.
Any other feedback is welcome
Thanks
Right now I think my car has stock brake pads and I am thinking about switching them for the track day since they are really worn out. I was thinking about getting stoptech pads since they produce less dust than the stock pads and are good for a DD. I am also thinking about changing the fluid. Any suggestions for the brake pads the fluid?
I am currently running 18x9 +35 wheels all around with RS3 V2's 265/40/18 on the back and goodgear eagle all season UHP 255/45/18 on the front. Any suggestions for the alignment? I am thinking about getting the matching RS3's for the front but I haven't decided.
Any other feedback is welcome
Thanks
#2
Lexus Test Driver
iTrader: (1)
I am thinking about doing a track day at AMP in August and have some questions.
Right now I think my car has stock brake pads and I am thinking about switching them for the track day since they are really worn out. I was thinking about getting stoptech pads since they produce less dust than the stock pads and are good for a DD. I am also thinking about changing the fluid. Any suggestions for the brake pads the fluid?
I am currently running 18x9 +35 wheels all around with RS3 V2's 265/40/18 on the back and goodgear eagle all season UHP 255/45/18 on the front. Any suggestions for the alignment? I am thinking about getting the matching RS3's for the front but I haven't decided.
Any other feedback is welcome
Thanks
Right now I think my car has stock brake pads and I am thinking about switching them for the track day since they are really worn out. I was thinking about getting stoptech pads since they produce less dust than the stock pads and are good for a DD. I am also thinking about changing the fluid. Any suggestions for the brake pads the fluid?
I am currently running 18x9 +35 wheels all around with RS3 V2's 265/40/18 on the back and goodgear eagle all season UHP 255/45/18 on the front. Any suggestions for the alignment? I am thinking about getting the matching RS3's for the front but I haven't decided.
Any other feedback is welcome
Thanks
For your first track day, you can probably get by with OEM or any equivalent brake pad - unless you start channeling Aryton Senna right off the bat! Though, I'd recommend staying away from one of the mild mannered street pads (like PMU NS400) for the track. I did my first track day with OEM pads & was fine. If you continue to track the car, then you can start shopping for a pad that will work best for you, whether it be a combo street/track model or a full-on track pad. Sorry, I have no experience with Stoptech pads..
One thing that's highly recommended is to bleed your brakes beforehand.. If it's been a while (or you're not even sure if/when it's been done before), it wouldn't hurt to go ahead a run a couple bottles of fluid through for a complete flush.. Ensuring you have good brake fluid is one of the most important things for safety.. The last thing you want is to boil your fluid & lose the brakes.
The things to focus on during your first outing should be learning the circuit, track etiquette, flags, etc, and just focus on smooth, deliberate gas/brake/steering inputs. Have fun!!
-Mike
#3
Wow!! What a reply!! So detailed and full of useful/helpful info!! Should definitely help you out OP!! What awesome forum members we have here in the F community!!
V.
V.
#4
juan
i also 2nd not using all seasons for track. they aren't going to give you desired grip. I do have experience with the rs3 and I do think if you had a matching f/r set that would do great.
as for the brake fluid i would suggest dot 4 motul rbf600 that is what I run in all my track cars. yes there are higher wet/dry boiling point fluids but for the money i believe rbf600 is one of the best.
i also just put stoptech sport pads on my is-f but i have not been able to hot lap with them yet. the only data i have is putting them on 2013 wrx and also acura tsx. brakes held up well at autobahn north here (5x 20 minute sessions) no issues so far
i also 2nd not using all seasons for track. they aren't going to give you desired grip. I do have experience with the rs3 and I do think if you had a matching f/r set that would do great.
as for the brake fluid i would suggest dot 4 motul rbf600 that is what I run in all my track cars. yes there are higher wet/dry boiling point fluids but for the money i believe rbf600 is one of the best.
i also just put stoptech sport pads on my is-f but i have not been able to hot lap with them yet. the only data i have is putting them on 2013 wrx and also acura tsx. brakes held up well at autobahn north here (5x 20 minute sessions) no issues so far
Last edited by imp0rted1; 07-14-16 at 06:22 AM.
#5
Pole Position
I'm using the Stoptech pads and Motul RBF600 fluid on the street. It's fine for that but if I planned to track my car, I'd put the Project Mu HC+800 pads on. Great deal with Speed Freaks USA Project Mu HC+800 as well. You can read about this at this link Speed Freaks USA Project Mu HC+800.
Trending Topics
#9
Pole Position
Mikersoft gave a good response. I have been to AMP as well as a few other members here. I agree on atleast running the same compound tires (all summers is preferable). As far as brake are concerned , AMP is a pretty easy on the brakes sort of track. Even in advanced groups I will not get fade with a OEM or a stoptech type pad if I'm mindful, in novice group you will not have any issue especially with the average speeds and traffic in those groups. Most of the heat will probably come from the traction control modulating the brakes (if you use TC) I don't use TC on track ever but then again this isn't my first rodeo. I would bleed you fluid and get some stoptech pads and call it a day, regarding brakes. I wouldn't transfer to race brake fluid, especially Motul, unless you plan on bleeding your entire system alot. Motul, unlike ATE, has is VERY hydroscopic and is great for racing is not ideal for a DD that doesn't see the fluid constantly swapped. If it sits around it loves to absorb moisture. If you really want a race type brake fluid go with something like ATE type 200, it has a high boiling point while offering good shelf life and VERY LOW hydroscopic qualities, so DD is not a issue. In all honesty I haven't seen many novices push their car enough to require anything more than stock.
#10
Lexus Test Driver
iTrader: (1)
I forgot to mention, I've been using Motul 5.1 brake fluid. It has a higher dry boiling point than OEM, but is supposedly more stable for DD use. My routine before a track day has been to bleed my brakes with a single pint.. If you can afford to take your IS-F to the track, I think the additional $12 for a new pint of brake fluid each time is worthwhile insurance...
I also recommend the Project Mu HC+800 as a good dual street/track pad.
-Mike
I also recommend the Project Mu HC+800 as a good dual street/track pad.
-Mike
#12
My first time at AMP I ran Porterfield R4S pads and they held up very well. I had no trouble slamming on the brakes repeatedly with no fade. I did have my brake fluid replaced before I went though. I also ran a pretty fresh set of Michelin PSS tires as well.
#13
Pole Position
Juanmedina, what is your experience level? Have you ever done autox or any other form of performance driving (competition go carts,FSAE) ? ZaxF and I will be at AMP on the 27th of this month, maybe you could come at that time instead, that way we could help you out. You could ride with me to kind of feel out the track. I really think for your first track day EVER concentrate on spending your money and time on the basic essentials, if you have the money get the best tires, even if buying all 4 new summers is your best application of resources. Like I said in novice group on a slowish technical track I can confidently say running race pads or fluid is overkill, but if you need to bleed the system go ahead and throw some good DOT4 and if you need pads, OEM or better is fine (even stoptech).
What you should also do is check out some video of some good drivers running the track. Get a mental image in your head of what is going on and the track map (this is all free !). Unfortunately TNiA doesn't have instructors so your on your own , unless you have a willing friend or private coach. Don't get to focused on all the equipment and be that guy with a race prepped car that is all over the track , off-line and doesn't even get his track pads into optimal heat range. Oh and remember to torque you wheels right before going out the first time.
What you should also do is check out some video of some good drivers running the track. Get a mental image in your head of what is going on and the track map (this is all free !). Unfortunately TNiA doesn't have instructors so your on your own , unless you have a willing friend or private coach. Don't get to focused on all the equipment and be that guy with a race prepped car that is all over the track , off-line and doesn't even get his track pads into optimal heat range. Oh and remember to torque you wheels right before going out the first time.
#14
Forum Administrator
iTrader: (2)
#15
Pole Position