Iphone4 and bluetooth :(
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Iphone4 and bluetooth :(
OK , I got my Iphone4 i synced it to my 2010 IS250 , syncs fine adds all the contacts my problem is when i click bluetooth audio it says the player is not found check player setting Can anyone help me out ??? i am bummed i cant play my music Help
Thanks
Thanks
#4
I Beg to differ. My 10 IS250 IS working just fine with my Iphone 4. I can stream music over bluetooth as well with no problems at all. To the Op, what steps are you taking when trying to pair the phone with A2DP?
#5
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
I set up a new phone on the navigation It connects the bluetooth and allows me to transfer contacts but when i go to audio and click on BT i press connect and it waits a moment i then it says audio not connected check you audio setting on device???
#6
Driver School Candidate
#7
To the OP, it should be the same with the phone as it is the iPod touch. You just have to pair them.. But remember the BTA to the stereo is not the same as the phone Bluetooth. Its easier to conceptualize in my case because I have a separate Motorola phone paired with the hands free phone, and an iPod touch paired with the stereo for music. In your case I'm guessing you need to pair twice, even though its the same device it could be two.
Trending Topics
#9
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
#11
Driver School Candidate
Thread Starter
Join Date: Mar 2010
Location: fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so i started from the beginning i first Synced the phone through BT after it has connected i transfer all my contacts, then i click on Audio press BT audio then it shows BT is not connected i press connect it tries to connect then it says BT audio not found check portable player setting ???? Any idea
#12
I know I had to put in passcode of 0000 when I did mine. I don't remember details, the voice prompt walked me through it -- it was pretty straight forward with the iPod Touch, not sure if its the same with the iPhone or not. The car owners manual should get you there.
One thing I do remember, it said I may need to re-pair my phone after doing the BTA, but in my case I did not. So since your audio and phone are the same device (mine are not) you might try unpairing the phone, try doing the audio first then the phone? Just an idea.
One thing I do remember, it said I may need to re-pair my phone after doing the BTA, but in my case I did not. So since your audio and phone are the same device (mine are not) you might try unpairing the phone, try doing the audio first then the phone? Just an idea.
#13
Lead Lap
iTrader: (3)
Join Date: Jan 2009
Location: SoCal 818
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
OMG hearing all this is like a dream... technology these days is so advanced!
I just got the iphone 4 and question now is.... what are the features for a 2007?
All i know is phone pairing. Can i do anything like stream music? or import phone book? this is all very new to me
I just got the iphone 4 and question now is.... what are the features for a 2007?
All i know is phone pairing. Can i do anything like stream music? or import phone book? this is all very new to me
#14
Pole Position
iTrader: (4)
Join Date: Dec 2008
Location: NorCal
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
same gotta 09 though. what can be done?! i already have an ipod interface but it doesnt fit as that stupid bumper case doesnt allow the adapter to be plugged in. so i might just run raw.
#15
I have 2010 IS and when I set mine up, the car's system set up the phone and media at the same time. You also might want to check the phones bluetooth settings. I have a Droid and it gives you an option to use bluetooth with either phone audio or media audio. DROID DOES...iPhone dosn't.