View Poll Results: How should I set up my LED lights? (in my headlights)
Just like OEM - dont make them flash, that's what turn signals are for!
11
55.00%
Make them flash and disable OEM orange turn signals
7
35.00%
Make them flash and make the OEM orange turn signals flash at the same time too
1
5.00%
Make them flash and alternate the turn signals
1
5.00%
Voters: 20. You may not vote on this poll
2012 Headlights - LED strip as a blinker?
#18
Driver School Candidate
Join Date: Dec 2012
Location: ca
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Help please
Hey guys I bought min of eBay and I'm doing my own wiring for the car can u please tell me which wire is positive out of the three that goes to the LED light thank you I've been stuck on figuring out on which wire is which don't want to bern them out
#19
Driver School Candidate
Join Date: Dec 2012
Location: ca
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I know not all AUDI's do it, but I have seen some that do here in Dallas. Now, I can't confirm if those AUDI owner's modified their cars - but that's where I got that idea.
Here's a vid I found on youtube... the LED's turn orange in this vid.. the ones I saw stayed white.
http://www.youtube.com/watch?v=rC9SZ...eature=related
Here's the picture of the relays I used. To make them 50%, all you need is 1 relay (5 pin - far left relay in picture)
The other 2 relays in the picture were needed to make the LED strips flash. (Flash at 100% or at 50%... depending on if parking light is on or if lowbeam is on)
EDIT:
removed wire colors as it may differ and I don't want to be responsible for shortening your new headlights!
Basically, there are 3 wires that control your LED strip. Find them via test light
Here's a vid I found on youtube... the LED's turn orange in this vid.. the ones I saw stayed white.
http://www.youtube.com/watch?v=rC9SZ...eature=related
Here's the picture of the relays I used. To make them 50%, all you need is 1 relay (5 pin - far left relay in picture)
The other 2 relays in the picture were needed to make the LED strips flash. (Flash at 100% or at 50%... depending on if parking light is on or if lowbeam is on)
EDIT:
removed wire colors as it may differ and I don't want to be responsible for shortening your new headlights!
Basically, there are 3 wires that control your LED strip. Find them via test light
Thread
Thread Starter
Forum
Replies
Last Post