Q about IS wheels
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Location: ca
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Q about IS wheels
I'm about to pick up some chrome 18' IS rims I think they are off an 07. Anyhow I was wondering if any one has pictures of them on a is300..? The wife has a 04 dark grey IS.
Here is the link ...
http://inlandempire.craigslist.org/pts/2236651541.html
Here is the link ...
http://inlandempire.craigslist.org/pts/2236651541.html
#2
Rookie
iTrader: (-1)
not a bad price. i think they fit but u might need to put some spacers in the front and i couldnt find a pic of the chrome ones
http://www.flickr.com/photos/52574018@N08/5483811447/http://www.flickr.com/photos/52574018@N08/5483811447/ by http://www.flickr.com/people/52574018@N08/, on Flickr
http://www.flickr.com/photos/52574018@N08/5483811447/http://www.flickr.com/photos/52574018@N08/5483811447/ by http://www.flickr.com/people/52574018@N08/, on Flickr
#5
Lead Lap
iTrader: (10)
Yes the 2IS 17x7 wheels have an ET 45, already 5mm more 'poke' than the stock equivalent.
And the 18" are staggered with much less conservative offsets.
I suggest you get the offsets and do the research quicktimes using these:
http://www.rimsntires.com/specs.jsp
http://www.1010tires.com/wheeloffsetcalculator.asp
#6
Lead Lap
iTrader: (1)
Which is strange, considering the 1IS has an OEM wheel spec of 17x7" with an ET 50... *and some even a 7.5" wide.
Yes the 2IS 17x7 wheels have an ET 45, already 5mm more 'poke' than the stock equivalent.
And the 18" are staggered with much less conservative offsets.
I suggest you get the offsets and do the research quicktimes using these:
http://www.rimsntires.com/specs.jsp
http://www.1010tires.com/wheeloffsetcalculator.asp
Yes the 2IS 17x7 wheels have an ET 45, already 5mm more 'poke' than the stock equivalent.
And the 18" are staggered with much less conservative offsets.
I suggest you get the offsets and do the research quicktimes using these:
http://www.rimsntires.com/specs.jsp
http://www.1010tires.com/wheeloffsetcalculator.asp
Last edited by rvalero; 02-27-11 at 08:45 PM.