Slip tire lights blink on a hill...
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Panama
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Slip tire lights blink on a hill...
Hi, I need help with my gx470 2007-31K.
today was stopped on a hill, when loose brake and I pressed the accelerator starts to sound a noise of hits by the area of the pedals and pull the slip light starts to Flash and until not for flashing the car does not accelerate.
any idea that could be?
Best Regards
today was stopped on a hill, when loose brake and I pressed the accelerator starts to sound a noise of hits by the area of the pedals and pull the slip light starts to Flash and until not for flashing the car does not accelerate.
any idea that could be?
Best Regards
#5
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Panama
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#6
It's normal, I freaked out the first time I heard it. Give it a little gas and it will go away, it's the active control kicking in.
http://www.tacomaworld.com/forum/off...ing-sound.html
http://www.tacomaworld.com/forum/off...ing-sound.html
Last edited by CruiserGX; 05-19-13 at 01:48 PM.
#7
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Panama
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
i have just come out of a parking lot, step on the brake, neutral, drive and started to do the clicking and suddenly feel that loose brake... it is as if the brake is stuck and loose suddenly and makes this happen since I wasn't on any hill, was flat surface...
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: Panama
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Slip tire lights blink... (not issue of ATRAC) new info
yesterday stood on a slight Hill, when loose brake the truck starts to go down slowly, and I hear clicking noise and flashes the light of sliptires...
Thread
Thread Starter
Forum
Replies
Last Post